Main thing of note: still sorting out the shutdown mess. See the
extended commit texts for more info.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
Documentation/feature-removal-schedule.txt | 25 ++++++++++++-------------
drivers/ata/libata-core.c | 6 ------
drivers/ata/libata-scsi.c | 9 ++++-----
drivers/ata/libata.h | 1 -
drivers/ata/sata_nv.c | 18 +-----------------
drivers/ata/sata_via.c | 2 +-
6 files changed, 18 insertions(+), 43 deletions(-)
Peer Chen (1):
drivers/ata: remove the wildcard from sata_nv driver
Tejun Heo (3):
sata_nv: fix fallout of devres conversion
libata: remove libata.spindown_compat
sata_via: pcim_iomap_regions() conversion missed BAR5
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 498ff31..5c8695a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -328,21 +328,20 @@ Who: Adrian Bunk <bunk@xxxxxxxxx>
---------------------------
-What: libata.spindown_compat module parameter
+What: libata spindown skipping and warning
When: Dec 2008
-Why: halt(8) synchronizes caches for and spins down libata disks
- because libata didn't use to spin down disk on system halt
- (only synchronized caches).
- Spin down on system halt is now implemented and can be tested
- using sysfs node /sys/class/scsi_disk/h:c:i:l/manage_start_stop.
+Why: Some halt(8) implementations synchronize caches for and spin
+ down libata disks because libata didn't use to spin down disk on
+ system halt (only synchronized caches).
+ Spin down on system halt is now implemented. sysfs node
+ /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
+ spin down support is available.
Because issuing spin down command to an already spun down disk
- makes some disks spin up just to spin down again, the old
- behavior needs to be maintained till userspace tool is updated
- to check the sysfs node and not to spin down disks with the
- node set to one.
- This module parameter is to give userspace tool the time to
- get updated and should be removed after userspace is
- reasonably updated.
+ makes some disks spin up just to spin down again, libata tracks
+ device spindown status to skip the extra spindown command and
+ warn about it.
+ This is to give userspace tools the time to get updated and will
+ be removed after userspace is reasonably updated.
Who: Tejun Heo <htejun@xxxxxxxxx>
---------------------------
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d5939e6..d3ea7f5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -101,12 +101,6 @@ int libata_noacpi = 1;
module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
-int ata_spindown_compat = 1;
-module_param_named(spindown_compat, ata_spindown_compat, int, 0644);
-MODULE_PARM_DESC(spindown_compat, "Enable backward compatible spindown "
- "behavior. Will be removed. More info can be found in "
- "Documentation/feature-removal-schedule.txt\n");
-
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b6a1de8..242c43e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -893,7 +893,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
return queue_depth;
}
-/* XXX: for ata_spindown_compat */
+/* XXX: for spindown warning */
static void ata_delayed_done_timerfn(unsigned long arg)
{
struct scsi_cmnd *scmd = (void *)arg;
@@ -901,7 +901,7 @@ static void ata_delayed_done_timerfn(unsigned long arg)
scmd->scsi_done(scmd);
}
-/* XXX: for ata_spindown_compat */
+/* XXX: for spindown warning */
static void ata_delayed_done(struct scsi_cmnd *scmd)
{
static struct timer_list timer;
@@ -966,8 +966,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
* removed. Read Documentation/feature-removal-schedule.txt
* for more info.
*/
- if (ata_spindown_compat &&
- (qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
+ if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
(system_state == SYSTEM_HALT ||
system_state == SYSTEM_POWER_OFF)) {
static unsigned long warned = 0;
@@ -1395,7 +1394,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
}
}
- /* XXX: track spindown state for spindown_compat */
+ /* XXX: track spindown state for spindown skipping and warning */
if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
qc->tf.command == ATA_CMD_STANDBYNOW1))
qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 13cb0c9..5e24666 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -58,7 +58,6 @@ extern int atapi_enabled;
extern int atapi_dmadir;
extern int libata_fua;
extern int libata_noacpi;
-extern int ata_spindown_compat;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 4cea3ef..1a49c77 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -229,7 +229,6 @@ struct nv_host_priv {
#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static void nv_remove_one (struct pci_dev *pdev);
#ifdef CONFIG_PM
static int nv_pci_device_resume(struct pci_dev *pdev);
#endif
@@ -288,12 +287,6 @@ static const struct pci_device_id nv_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
- { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
- { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC },
{ } /* terminate list */
};
@@ -306,7 +299,7 @@ static struct pci_driver nv_pci_driver = {
.suspend = ata_pci_device_suspend,
.resume = nv_pci_device_resume,
#endif
- .remove = nv_remove_one,
+ .remove = ata_pci_remove_one,
};
static struct scsi_host_template nv_sht = {
@@ -1613,15 +1606,6 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
IRQF_SHARED, ppi[0]->sht);
}
-static void nv_remove_one (struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct nv_host_priv *hpriv = host->private_data;
-
- ata_pci_remove_one(pdev);
- kfree(hpriv);
-}
-
#ifdef CONFIG_PM
static int nv_pci_device_resume(struct pci_dev *pdev)
{
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index d105d2c..ac4f43c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -441,7 +441,7 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
return -ENOMEM;
}
- rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
"PCI BARs (errno=%d)\n", rc);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
