Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers
will be used in the following patches to adopt new init model.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/ata/libata-core.c | 93 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/libata.h | 5 ++
2 files changed, 98 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dd4e178..6d42550 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5820,6 +5820,55 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
}
/**
+ * ata_host_alloc_pinfo - alloc host and init with port_info array
+ * @dev: generic device this host is associated with
+ * @ppi: array of ATA port_info to initialize host with
+ * @n_ports: number of ATA ports attached to this host
+ *
+ * Allocate ATA host and initialize with info from @ppi. If NULL
+ * terminated, @ppi may contain fewer entries than @n_ports. The
+ * last entry will be used for the remaining ports.
+ *
+ * RETURNS:
+ * Allocate ATA host on success, NULL on failure.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ */
+struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+ const struct ata_port_info * const * ppi,
+ int n_ports)
+{
+ const struct ata_port_info *pi;
+ struct ata_host *host;
+ int i, j;
+
+ host = ata_host_alloc(dev, n_ports);
+ if (!host)
+ return NULL;
+
+ for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ppi[j])
+ pi = ppi[j++];
+
+ ap->pio_mask = pi->pio_mask;
+ ap->mwdma_mask = pi->mwdma_mask;
+ ap->udma_mask = pi->udma_mask;
+ ap->flags |= pi->flags;
+ ap->ops = pi->port_ops;
+
+ if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
+ host->ops = pi->port_ops;
+ if (!host->private_data && pi->private_data)
+ host->private_data = pi->private_data;
+ }
+
+ return host;
+}
+
+/**
* ata_host_start - start and freeze ports of an ATA host
* @host: ATA host to start ports for
*
@@ -6032,6 +6081,48 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
}
/**
+ * ata_host_activate - start host, request IRQ and register it
+ * @host: target ATA host
+ * @irq: IRQ to request
+ * @irq_handler: irq_handler used when requesting IRQ
+ * @irq_flags: irq_flags used when requesting IRQ
+ * @sht: scsi_host_template to use when registering the host
+ *
+ * After allocating an ATA host and initializing it, most libata
+ * LLDs perform three steps to activate the host - start host,
+ * request IRQ and register it. This helper takes necessasry
+ * arguments and performs the three steps in one go.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_host_activate(struct ata_host *host, int irq,
+ irq_handler_t irq_handler, unsigned long irq_flags,
+ struct scsi_host_template *sht)
+{
+ int rc;
+
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+
+ rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
+ dev_driver_string(host->dev), host);
+ if (rc)
+ return rc;
+
+ rc = ata_host_register(host, sht);
+ /* if failed, just free the IRQ and leave ports alone */
+ if (rc)
+ devm_free_irq(host->dev, irq, host);
+
+ return rc;
+}
+
+/**
* ata_device_add - Register hardware device with ATA and SCSI layers
* @ent: Probe information describing hardware device to be registered
*
@@ -6537,8 +6628,10 @@ EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
+EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_host_register);
+EXPORT_SYMBOL_GPL(ata_host_activate);
EXPORT_SYMBOL_GPL(ata_device_add);
EXPORT_SYMBOL_GPL(ata_host_detach);
EXPORT_SYMBOL_GPL(ata_sg_init);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 06cf23f..300daf6 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -734,9 +734,14 @@ extern int ata_pci_device_resume(struct pci_dev *pdev);
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
+extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+ const struct ata_port_info * const * ppi, int n_ports);
extern int ata_host_start(struct ata_host *host);
extern int ata_host_register(struct ata_host *host,
struct scsi_host_template *sht);
+extern int ata_host_activate(struct ata_host *host, int irq,
+ irq_handler_t irq_handler, unsigned long irq_flags,
+ struct scsi_host_template *sht);
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *,
--
1.5.0.3
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
