Conversion to resource-managed iomap was buggy causing init failures on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. DO NOT APPLY YET. --- Markus, does this fix your problem? diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index baca6d7..fe9101a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) { struct ata_probe_ent *probe_ent; struct ata_port_info *ppi[2]; - void __iomem * const *iomap; + void __iomem *bar5; ppi[0] = ppi[1] = &vt6420_port_info; probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; - iomap = pcim_iomap_table(pdev); - probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0); - probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1); + bar5 = pcim_iomap(pdev, 5, 0); + if (!bar5) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return NULL; + } + + probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0); + probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1); return probe_ent; } @@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) probe_ent->mwdma_mask = 0x07; probe_ent->udma_mask = 0x7f; + for (i = 0; i < 6; i++) + if (!pcim_iomap(pdev, i, 0)) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to iomap PCI BAR %d\n", i); + return NULL; + } + for (i = 0; i < N_PORTS; i++) vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i); @@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); + rc = pci_request_regions(pdev, DRV_NAME); if (rc) { pcim_pin_device(pdev); return rc; - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html