On Fri, 12 May 2006 22:24:37 +0900, Tejun Heo wrote: > ahci: new EH, irq-pio, NCQ, hotplug Should suspend-to-RAM work now on AHCI? It produces lots of messages now but does not work either now. # ls ata1.00: exception Emask 0x10 SAct 0x1 SEra 0x4050000 action 0x3 frozen ata1.00 tag 0 cmd 0x60 Emask 0x14 stat 0x40 err 0x0 (ATA bus error) ata1: soft resetting port ata1: softreset failed (1st FIS failed) ata1: softreset failed, retrying in 5 secs ata1: hard resettinq port ata1: port is slow to respond, please be patient ata1: port failed to respond (30 secs) ata1: COMRESET failed (device not ready) ata1: hardreset failed, retrying in 5 secs ata1: hard resettinq port ata1: port is slow to respond, please be patient ata1: port failed to respond (30 secs) ata1: COMRESET failed (device not ready) ata1: reset failed, giving up ata1.00: disabled ata1: EH complete sd 0:0:0:0: SCSI error: return code = 0x40000 ... It produces lots of more SCSI errors (I did not want to write all those down...) but no ata1-errors any more. Michael - : send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
