On Sun, 07 May 2006 14:14:08 +0200 Mogens Valentin <mogensv@xxxxxxxxxxxxxxxx> wrote: > You could try the config with MS, where AFAIK, it does SATA300 mode. > You could try skimming forums on ocworkbench.com for info, as this is > kindof an asian homeforum, with JCM360 being designed by .tw Jmicron. No Windows on this computer or anywhere nearby. Besides, I would need to buy it beforehand ;-) > Whatever, it may or may not be worth too much trouble. I'm thinking > JCM360 may have an unclear future, since AFAIK the later ULi chipsets > have native SATA 300 support, and nVidia bought ULi, perhaps to > produce entry level chipsets (according to press). > I was very interested in that same board, due to very good test > results and features, but skipped it for the very JCM360 driver issue. > Being a dirt cheap board, you could spend on a separate selected SATA > interface (to keep for the next board). The mobo certainly has enough > PCIx slots for that. As I just wrote to the mailinglist, the Hitachi disk utilities did the trick as Hitachi is actually enforcing the 1.5Gbps on the user which is totally understandable and even a pretty good default given the technical knowledge of most computer users. > What's you overall experience with the board, WRT > stability/performance? I'm very pleased with it actually. All parts of the motherboard are well supported under Linux. Sound, ethernet, chipset .. you name it. The only issue I encountered which I wasn't able to fix out of pure laziness and the availability of an 'easy way out' would be the sound. Whenever I put a quasi-high load on the ethernet controller (6Mbps or more) the onboard soundchip would crumble and stop the work. I could reproduce it even .. without pointers to a possible solution though. Anyway, I "fixed" that by using my old Zoltrix Nightingale PCI card (cmipci chip .. pretty good value card .. better than Creative's) and disabled the onboard sound. I'm sure the issue can be resolved .. if you were to look into it more thoroughly of course. Regards, Moritz PS: As I just recalled .. I wasn't able to get the sensor chip working or even gather information about what kind of chip is used on the motherboard. - : send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
