Re: sata_sil24 resetting controller...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



jason wrote:
Jan Dittmer wrote


I shifted the sata card into a 66MHz, 32bit PCI slot now and the
problems went away. Just for the record, this is an Asus PU-DLS
mainboard with E7501 chipset. Now I can dd from all devices without
any error messages, giving me about 360mb/s continuous throughput for
6 devices which isn't that bad I suppose.
The card gets assigned irq 22 in both configurations but in the
latter the irq is shared with the on-board usb-uhci controller
which somehow seems to work better...

push a 64bit+ 133Mhz+ non bridge PCI-X device into a 32bit slot? Is it right?
I am confused...


Well, it's not optimal, but most PCI-X cards including sil3124 are backward compatible with PCI, so....

--
tejun
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux