Emmanuel Fleury wrote:
Hi,
Roger Heflin wrote:
ata1: command 0xc8 timeout, stat 0x50 host_stat 0x24
ata1: status=0x50 { DriveReady SeekComplete }
sda: Current: sense key: No Sense
Additional sense: No additional sense information
Info fld=0x3481ff
ata2: command 0xc8 timeout, stat 0x50 host_stat 0x24
ata2: status=0x50 { DriveReady SeekComplete }
sdb: Current: sense key: No Sense
Additional sense: No additional sense information
Info fld=0x166ff
ata1: command 0xc8 timeout, stat 0x50 host_stat 0x24
ata1: status=0x50 { DriveReady SeekComplete }
sda: Current: sense key: No Sense
Additional sense: No additional sense information
Info fld=0x3482ff
ata2: command 0xc8 timeout, stat 0x50 host_stat 0x24
ata2: status=0x50 { DriveReady SeekComplete }
sdb: Current: sense key: No Sense
Additional sense: No additional sense information
Info fld=0x167ff
ata1: command 0xca timeout, stat 0x50 host_stat 0x24
ata1: status=0x50 { DriveReady SeekComplete }
Can you try to set the following config options as module:
Device Drivers --->
SCSI device support --->
SCSI low-level drivers --->
AHCI SATA support
And
Device Drivers --->
SCSI device support --->
SCSI low-level drivers --->
NVIDIA SATA support
Both are already build as modules, so the failure was with
them as modules. I used the default type of config setup
from FC5 kernels which loves to build everything as
modules, since FC5 gets annoyed with things being build it.
Roger
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
