Tejun Heo wrote:
On Thu, Apr 20, 2006 at 02:01:12PM +0800, zhao, forrest wrote:
Hi, Tejun
When testing hotplug and reading your patches, I thought an interrupt
lost might occur on AHCI in the following case:
1 system boot up with SATA disk A attached to port 1 and disk B attached
to port 2
2 disk B at port 2 is hot-unplugged
3 ata_eh_revive() will execute several round of soft-reset/hard-reset as
we observed in dmesg
4 now imagine ata_eh_revive() start to execute the last round of
hard-reset, so the code path comes into ata_do_reset(), then into
ahci_hardreset()
5 disk B is hot-plugged to port 2, and an interrupt is triggered
6 CPU respond to this interrupt when code path execute between
ahci_start_engine(); in ahci_hardreset() and
ap->flags &= ~ATA_FLAG_FROZEN; in ata_do_reset();
7 then this interrupt is lost since no EH is scheduled to handle it.
I think invoking ata_eh_schedule_port() in ahci_postreset() can fix
the problem, is it right?
Hello, Forrest.
Yes, you're right. The problem is that we cannot tell whether such
interrupts are due to the reset or some other events. The goal was to
make sure existing devices are okay on EH completion. If new devices
get connected during EH, we might lose the event, which IMHO is okay.
Maybe this can be solved by merging EH and probe into one. Probing
and EH revive are pretty similar in the first place. I'll think about
Speaking to hotplug specifically, on hardware with plug irqs, it needs
to do something like
* receive hotplug interrupt
* hang out for a while, eating hotplug interrupt events
(debounce)
* revalidate device
* issue unplug and/or plug to SCSI layer
that. But I still think it's okay to lose hotplug interrupt during
EH. All the user has to do is simply replug the device or issue
manual scan.
If losing the hotplug interrupt requires the user to do that, no that's
definitely not OK... for a hotplug interrupt during EH, you want to
stop what you're doing at the nearest opportunity, and start all over
again revalidating the device. If its a different device, all the
accumulated state is flushed.
Jeff
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
