Hi everyone,
not sure this is the right list.
I currently have data corruption when I md5sum large files on both my
SATA as well as my PATA drive. When I turn off DMA on the PATA drive
it is slow, but no data corruption - I havent figured out to turn off
DMA for the SATA.
If it helps, when I diff -u it looks like it is large blocks that are
missing/mixed up whatever, but not a bit here or there.
This is the second board (but the same model) and still have the same issue.
The board seems to have a VIA KT400A as well as a VT8237.
The boot log is attached. Happens with all fedora kernels I tried and
also with vanilla linux-2.6.16.4.
cat /proc/interrupts shows:
CPU0
0: 9055498 IO-APIC-edge timer
1: 19534 IO-APIC-edge i8042
7: 2 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
14: 1399782 IO-APIC-edge ide0
15: 108188 IO-APIC-edge ide1
169: 13820 IO-APIC-level libata
185: 47999 IO-APIC-level eth1
193: 0 IO-APIC-level VIA8237
201: 105733 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
NMI: 0
LOC: 9056156
ERR: 0
MIS: 0
lspci shows:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0c.0 Network controller: Intersil Corporation Intersil ISL3890
[Prism GT/Prism Duette] (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA
RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev a1)
any ideas, patches I can try, etc. would be great!
Florian
Linux version 2.6.16.4 (root@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Wed Apr 12 15:11:07 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000da000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 AMI ) @ 0x000fa8b0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
ACPI: DSDT (v001 VIA K7VT4 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
Overriding APIC driver with bigsmp
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Physflat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: ro root=/dev/hda2 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0463000 soft=c0483000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1833.230 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030416k/1048512k available (2386k kernel code, 17452k reserved, 816k data, 240k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3671.77 BogoMIPS (lpj=7343549)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) XP 2500+ stepping 00
Leaving ESR disabled.
Total of 1 processors activated (3671.77 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1204k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [1106/3189] 000600 00
PCI: Calling quirk c0206430 for 0000:00:00.0
PCI: Calling quirk c02dac90 for 0000:00:00.0
PCI: Calling quirk c02da6d0 for 0000:00:00.0
PCI: Found 0000:00:01.0 [1106/b198] 000604 01
PCI: Calling quirk c0206430 for 0000:00:01.0
PCI: Calling quirk c02dac90 for 0000:00:01.0
PCI: Calling quirk c02da6d0 for 0000:00:01.0
PCI: Found 0000:00:0c.0 [1260/3890] 000280 00
PCI: Calling quirk c0206430 for 0000:00:0c.0
PCI: Calling quirk c02dac90 for 0000:00:0c.0
PCI: Calling quirk c02da6d0 for 0000:00:0c.0
PCI: Found 0000:00:0f.0 [1106/3149] 000104 00
PCI: Calling quirk c0206430 for 0000:00:0f.0
PCI: Calling quirk c02dac90 for 0000:00:0f.0
PCI: Calling quirk c02da6d0 for 0000:00:0f.0
PCI: Found 0000:00:0f.1 [1106/0571] 000101 00
PCI: Calling quirk c0206430 for 0000:00:0f.1
PCI: Calling quirk c02dac90 for 0000:00:0f.1
PCI: Calling quirk c02da6d0 for 0000:00:0f.1
PCI: Found 0000:00:10.0 [1106/3038] 000c03 00
PCI: Calling quirk c0206430 for 0000:00:10.0
PCI: Calling quirk c02dac90 for 0000:00:10.0
PCI: Calling quirk c02da6d0 for 0000:00:10.0
PCI: Found 0000:00:10.1 [1106/3038] 000c03 00
PCI: Calling quirk c0206430 for 0000:00:10.1
PCI: Calling quirk c02dac90 for 0000:00:10.1
PCI: Calling quirk c02da6d0 for 0000:00:10.1
PCI: Found 0000:00:10.2 [1106/3038] 000c03 00
PCI: Calling quirk c0206430 for 0000:00:10.2
PCI: Calling quirk c02dac90 for 0000:00:10.2
PCI: Calling quirk c02da6d0 for 0000:00:10.2
PCI: Found 0000:00:10.3 [1106/3038] 000c03 00
PCI: Calling quirk c0206430 for 0000:00:10.3
PCI: Calling quirk c02dac90 for 0000:00:10.3
PCI: Calling quirk c02da6d0 for 0000:00:10.3
PCI: Found 0000:00:10.4 [1106/3104] 000c03 00
PCI: Calling quirk c0206430 for 0000:00:10.4
PCI: Calling quirk c02dac90 for 0000:00:10.4
PCI: Calling quirk c02da6d0 for 0000:00:10.4
PCI: Found 0000:00:11.0 [1106/3227] 000601 00
PCI: Calling quirk c0206430 for 0000:00:11.0
PCI: Calling quirk c02dac90 for 0000:00:11.0
PCI: Calling quirk c02da6d0 for 0000:00:11.0
PCI: Found 0000:00:11.5 [1106/3059] 000401 00
PCI: Calling quirk c0206430 for 0000:00:11.5
PCI: Calling quirk c02dac90 for 0000:00:11.5
PCI: Calling quirk c02da6d0 for 0000:00:11.5
PCI: Found 0000:00:12.0 [1106/3065] 000200 00
PCI: Calling quirk c0206430 for 0000:00:12.0
PCI: Calling quirk c02dac90 for 0000:00:12.0
PCI: Calling quirk c02da6d0 for 0000:00:12.0
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [10de/0110] 000300 00
PCI: Calling quirk c0206430 for 0000:01:00.0
PCI: Calling quirk c02dac90 for 0000:01:00.0
Boot video device is 0000:01:00.0
PCI: Calling quirk c02da6d0 for 0000:01:00.0
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
PCI: Bus scan for 0000:00 returning with max=01
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: cdd00000-ddcfffff
PCI: Calling quirk c02065f0 for 0000:00:01.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1144900290.776:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Calling quirk c0205b30 for 0000:00:00.0
PCI: Calling quirk c02b8890 for 0000:00:00.0
PCI: Calling quirk c0205b30 for 0000:00:01.0
PCI: Calling quirk c02b8890 for 0000:00:01.0
PCI: Calling quirk c0205b30 for 0000:00:0c.0
PCI: Calling quirk c02b8890 for 0000:00:0c.0
PCI: Calling quirk c0205b30 for 0000:00:0f.0
PCI: Calling quirk c02b8890 for 0000:00:0f.0
PCI: Calling quirk c0205b30 for 0000:00:0f.1
PCI: Calling quirk c02b8890 for 0000:00:0f.1
PCI: Calling quirk c0205b30 for 0000:00:10.3
PCI: Calling quirk c02b8890 for 0000:00:10.3
PCI: Calling quirk c0205b30 for 0000:00:10.2
PCI: Calling quirk c02b8890 for 0000:00:10.2
PCI: Calling quirk c0205b30 for 0000:00:10.1
PCI: Calling quirk c02b8890 for 0000:00:10.1
PCI: Calling quirk c0205b30 for 0000:00:10.0
PCI: Calling quirk c02b8890 for 0000:00:10.0
PCI: Calling quirk c0205b30 for 0000:00:10.4
PCI: Calling quirk c02b8890 for 0000:00:10.4
PCI: Calling quirk c0205b30 for 0000:00:11.0
PCI: Calling quirk c0206150 for 0000:00:11.0
PCI: Bypassing VIA 8237 APIC De-Assert Message
PCI: Calling quirk c02b8890 for 0000:00:11.0
PCI: Calling quirk c0205b30 for 0000:00:11.5
PCI: Calling quirk c02b8890 for 0000:00:11.5
PCI: Calling quirk c0205b30 for 0000:00:12.0
PCI: Calling quirk c02b8890 for 0000:00:12.0
PCI: Calling quirk c0205b30 for 0000:01:00.0
PCI: Calling quirk c02b8890 for 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 32M @ 0xe0000000
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Calling quirk c02065f0 for 0000:00:0f.1
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST380021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-ROM BDV316C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD PS2K AC9 MC9 ILAN SLPB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 350k
SCSI subsystem initialized
libata version 1.20 loaded.
sata_via 0000:00:0f.0: version 1.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
PCI: Calling quirk c02065f0 for 0000:00:0f.0
PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
sata_via 0000:00:0f.0: routed to hard irq line 9
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
ata1: SATA link up 1.5 Gbps (SStatus 113)
input: AT Translated Set 2 keyboard as /class/input/input0
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_via
input: AT Translated Set 2 keyboard as /class/input/input1
ata2: SATA link down (SStatus 0)
scsi1 : sata_via
Vendor: ATA Model: ST3250624AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
PCI: Calling quirk c02065f0 for 0000:00:12.0
PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
eth0: VIA Rhine II at 0xdfff9d00, 00:13:8f:23:79:99, IRQ 177.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Loaded prism54 driver, version 1.2
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
PCI: Calling quirk c02065f0 for 0000:00:11.5
PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 1
PCI: Enabling bus mastering for device 0000:00:11.5
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
PCI: Calling quirk c02065f0 for 0000:00:10.4
PCI: Via IRQ fixup for 0000:00:10.4, from 10 to 9
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 201, io mem 0xdfff9e00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
PCI: Calling quirk c02065f0 for 0000:00:10.0
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 201, io base 0x0000c800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201
PCI: Calling quirk c02065f0 for 0000:00:10.1
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 201, io base 0x0000cc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201
PCI: Calling quirk c02065f0 for 0000:00:10.2
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 201, io base 0x0000d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 3
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201
PCI: Calling quirk c02065f0 for 0000:00:10.3
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 201, io base 0x0000d400
usb usb5: configuration #1 chosen from 1 choice
usb 1-6: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Mouse M-BA47 as /class/input/input2
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on usb-0000:00:10.0-1
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: FSC Model: MEMORYBIRD USB2 Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1020160 512-byte hdwr sectors (522 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 1020160 512-byte hdwr sectors (522 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb: unknown partition table
sd 2:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048784k swap on /dev/hda1. Priority:-1 extents:1 across:1048784k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8191 buckets, 65528 max) - 232 bytes per conntrack
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
NFSD: starting 90-second grace period
Linux video capture interface: v1.00
usbcore: registered new driver dsbr100
drivers/usb/media/dsbr100.c: v0.40:D-Link DSB-R100 USB FM radio driver
ieee1394: Initialized config rom entry `ip1394'
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth1: resetting device...
eth1: uploading firmware...
eth1: firmware version: 1.0.3.0
eth1: firmware upload complete
eth1: interface reset complete
hda: DMA disabled
