Mark Lord wrote (ao):
> > The 2.6.16-git3 snapshot is stable for me like -rc6-mm1 and -rc6-mm2
> > are :-)
> ..
> > Btw, I do still get these (any kernel), but with no visible effect:
> >
> > [ 2306.952183] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> 0xb/47/00
> > [ 2306.952246] ata6: status=0xd0 { Busy }
> > [ 2891.892225] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> 0xb/47/00
> > [ 2891.892277] ata5: status=0xd0 { Busy }
> > [ 4550.013582] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> 0xb/47/00
> > [ 4550.013637] ata6: status=0xd0 { Busy }
> > [ 4864.850340] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> 0xb/47/00
> > [ 4864.850393] ata9: status=0xd0 { Busy }
> > [ 4968.681651] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> 0xb/47/00
> > [ 4968.681711] ata9: status=0xd0 { Busy }
>
> The 2.6.16-git3 (and -git4) drivers are still missing the latest
> critical fix that started this thread. Could you apply that also, and
> see if the messages above go away?
I've applied the patch against 2.6.16-git4. I'm sorry to say the
messages are still there:
[ 1038.536894] kjournald starting. Commit interval 5 seconds
[ 1038.555040] EXT3 FS on md0, internal journal
[ 1038.555072] EXT3-fs: mounted filesystem with writeback data mode.
[ 1418.639290] ata11: status=0x50 { DriveReady SeekComplete }
[ 1418.639356] ata11: error=0x50 { UncorrectableError SectorIdNotFound }
[ 1418.639418] sdh: Current: sense key=0x0
[ 1418.639448] ASC=0x0 ASCQ=0x0
[ 1418.639481] Info fld=0x505050
[ 1684.727367] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 1684.727420] ata9: status=0xd0 { Busy }
[ 2223.664107] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 2223.664162] ata6: status=0xd0 { Busy }
[ 2381.589354] ata11: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 2381.589416] ata11: status=0xd0 { Busy }
[ 2511.238690] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 2511.238753] ata9: status=0xd0 { Busy }
[ 2990.792908] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 2990.792960] ata7: status=0xd0 { Busy }
[ 4672.691569] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 4672.691623] ata8: status=0xd0 { Busy }
[ 4988.884663] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 4988.884717] ata6: status=0xd0 { Busy }
Could the ata11/sdh message be bogus? I re-create the raid5 and fs every
reboot.
--
Humilis IT Services and Solutions
http://www.humilis.net
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
