Douglas Gilbert wrote:
Douglas Gilbert wrote:
Jeff Garzik wrote:
Chris Paulson-Ellis wrote:
Hi,
I have a problem with udev persistent device naming for SATA drives
that is caused by the libata implementation of the page 0x83 SCSI
device identifier query. See this thead from hotplug-devel:
http://marc.theaimsgroup.com/?t=113518947900002&r=1&w=2
I can work around the problem using /etc/scsi_id.config or udev rules
(see the thread), but here is a patch to fix the problem at source.
What do you think?
Regards,
Chris.
--- drivers/scsi/libata-scsi.c.orig 2005-12-22 23:23:55.000000000
+0000
+++ drivers/scsi/libata-scsi.c 2005-12-22 23:56:14.000000000 +0000
@@ -1532,16 +1532,13 @@
return 0;
}
-static const char *inq_83_str = "Linux ATA-SCSI simulator";
-
/**
* ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is
sent.
* @buflen: Response buffer length.
*
- * Returns device identification. Currently hardcoded to
- * return "Linux ATA-SCSI simulator".
+ * Returns ATA device serial number (as for page 80).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -1551,13 +1548,14 @@
unsigned int buflen)
{
rbuf[1] = 0x83; /* this page code */
- rbuf[3] = 4 + strlen(inq_83_str); /* page len */
+ rbuf[3] = 4 + ATA_SERNO_LEN; /* page len */
/* our one and only identification descriptor (vendor-specific) */
- if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) {
+ if (buflen > (ATA_SERNO_LEN + 4 + 4 - 1)) {
rbuf[4 + 0] = 2; /* code set: ASCII */
- rbuf[4 + 3] = strlen(inq_83_str);
- memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str));
+ rbuf[4 + 3] = ATA_SERNO_LEN;
+ ata_dev_id_string(args->id, (unsigned char *) rbuf + 4
+ 4,
+ ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
Douglas Gilbert has an improved patch along these lines...
Oops, a minor documentation malfunction with that patch.
Here is a second attempt ...
I assume that is a prompt to roll another version
of that VPD patch, this time against lk 2.6.16-rc5
as my git tree is unavailable.
Changelog:
- make existing libata VPD device identification page (0x83)
supply the ATA serial number in the libata "vendor
specific" designator (from Chris Paulson-Ellis)
- add a "t10 vendor id based" designator as defined in
SAT rev 08 (section 10.3.4.2.3) that supplies ATA
model and serial numbers
- make the libata VPD page 0x83 more extensible (for
adding more designators in the future).
- rename EVPD to VPD in various places. Enable Vital
Product Data (EVPD) is a bit in the INQUIRY cdb.
Signed-off-by: Douglas Gilbert <dougg@xxxxxxxxxx>
after further thought and a spec consult... applied.
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
