On Mon, Mar 20, 2006 at 02:57:38PM -0500, Jeff Garzik wrote: > Gordon Atwood wrote: > >Ok, I've searched thru dozens of webpages and done the RTFM thing. If its > >really obvious, sorry, I still missed it. > > http://linux-ata.org/faq-sata-raid.html#tx2 > > http://linux-ata.org/faq-sata-raid.html#dmraid Hmm... Ok, so a TX4000 is equivalent to a TX4. Nothing I read suggested that so I missed this. And this is a fake raid card. Figures. Should probably just chuck it. Unfortunately, although dmraid 'sees' sda-sdd it only recognizes the striped array on sdc-sdd. It totally ignores the striped array on sda-sdb. Even if it did see them, I don't see how I'm any further ahead. Why should I bother with dmraid when I should just go be able to go directly to sda-d, format them and then layer software RAID or LVM on top of that. I can set up the four disks as individual single-disk arrays in the Promise BIOS and away we go. If the Promise card has overhead for processing I/O it will be there regardless of whether I go thru dmraid or mdadm or LVM. At least in the latter configuration, I can always go out and get a real 4 port ide card and just hook up the disks to it. Then this card can go in the trash. Thanks much for the pointer. Interesting how no matter how hard you search, there is always a direct thread to the info that you want that you'll completely miss :-) G.H.A. - : send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
