Gaston, Jason D wrote:
Hello,
We are seeing the following error messages in dmesg with the 2.6.16-rc5
kernel. I have also tried to apply the git10 patch and still see the
same errors. This is seen using a Plextor PX-716SA or PX-712SA SATA
DVDRW drive when in AHCI mode. I do not see this message when the SATA
controller is set to IDE mode, in the BIOS. I have reproduced this
using Intel ICH6R, ICH7R and ICH8 SATA controllers. I have
atapi_enabled=1 set in the libata-core.c file. These error messages
continue to be repeatedly logged about every 2 seconds. Can someone
tell me what is going on and if this will be addressed in the next RC
release of the 2.6.16 kernel?
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00
sr0: CDROM (ioctl) error, command: <6>Test Unit Ready 00 00 00 00 00 00
sr: Current [descriptor]: sense key: Aborted Command
Additional sense: No additional sense information
Probably its just too chatty, since ATAPI throws a lot of errors...
Jeff
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
