Re: [PATCH RFC v3 01/21] ACPI: Only enumerate enabled (or functional) devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 14, 2023 at 7:10 PM Russell King (Oracle)
<linux@xxxxxxxxxxxxxxx> wrote:
>
> On Thu, Dec 14, 2023 at 06:47:00PM +0100, Rafael J. Wysocki wrote:
> > On Thu, Dec 14, 2023 at 6:32 PM Jonathan Cameron
> > <Jonathan.Cameron@xxxxxxxxxx> wrote:
> > >
> > > On Wed, 13 Dec 2023 12:49:16 +0000
> > > Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx> wrote:
> > >
> > > > From: James Morse <james.morse@xxxxxxx>
> > > >
> > > > Today the ACPI enumeration code 'visits' all devices that are present.
> > > >
> > > > This is a problem for arm64, where CPUs are always present, but not
> > > > always enabled. When a device-check occurs because the firmware-policy
> > > > has changed and a CPU is now enabled, the following error occurs:
> > > > | acpi ACPI0007:48: Enumeration failure
> > > >
> > > > This is ultimately because acpi_dev_ready_for_enumeration() returns
> > > > true for a device that is not enabled. The ACPI Processor driver
> > > > will not register such CPUs as they are not 'decoding their resources'.
> > > >
> > > > Change acpi_dev_ready_for_enumeration() to also check the enabled bit.
> > > > ACPI allows a device to be functional instead of maintaining the
> > > > present and enabled bit. Make this behaviour an explicit check with
> > > > a reference to the spec, and then check the present and enabled bits.
> > > > This is needed to avoid enumerating present && functional devices that
> > > > are not enabled.
> > > >
> > > > Signed-off-by: James Morse <james.morse@xxxxxxx>
> > > > Tested-by: Miguel Luis <miguel.luis@xxxxxxxxxx>
> > > > Tested-by: Vishnu Pajjuri <vishnu@xxxxxxxxxxxxxxxxxxxxxx>
> > > > Tested-by: Jianyong Wu <jianyong.wu@xxxxxxx>
> > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
> > > > ---
> > > > If this change causes problems on deployed hardware, I suggest an
> > > > arch opt-in: ACPI_IGNORE_STA_ENABLED, that causes
> > > > acpi_dev_ready_for_enumeration() to only check the present bit.
> > >
> > > My gut feeling (having made ACPI 'fixes' in the past that ran into
> > > horribly broken firmware and had to be reverted) is reduce the blast
> > > radius preemptively from the start. I'd love to live in a world were
> > > that wasn't necessary but I don't trust all the generators of ACPI tables.
> > > I'll leave it to Rafael and other ACPI experts suggest how narrow we should
> > > make it though - arch opt in might be narrow enough.
> >
> > A chicken bit wouldn't help much IMO, especially in the cases when
> > working setups get broken.
> >
> > I would very much prefer to limit the scope of it, say to processors
> > only, in the first place.
>
> Thanks for the feedback and the idea.
>
> I guess we need something like:
>
>         if (device->status.present)
>                 return device->device_type != ACPI_BUS_TYPE_PROCESSOR ||
>                        device->status.enabled;
>         else
>                 return device->status.functional;
>
> so we only check device->status.enabled for processor-type devices?

Yes, something like this.





[Index of Archives]     [Linux Kernel]     [Sparc Linux]     [DCCP]     [Linux ARM]     [Yosemite News]     [Linux SCSI]     [Linux x86_64]     [Linux for Ham Radio]

  Powered by Linux