From: James Morse <james.morse@xxxxxxx> Today the ACPI enumeration code 'visits' all devices that are present. This is a problem for arm64, where CPUs are always present, but not always enabled. When a device-check occurs because the firmware-policy has changed and a CPU is now enabled, the following error occurs: | acpi ACPI0007:48: Enumeration failure This is ultimately because acpi_dev_ready_for_enumeration() returns true for a device that is not enabled. The ACPI Processor driver will not register such CPUs as they are not 'decoding their resources'. Change acpi_dev_ready_for_enumeration() to also check the enabled bit. ACPI allows a device to be functional instead of maintaining the present and enabled bit. Make this behaviour an explicit check with a reference to the spec, and then check the present and enabled bits. This is needed to avoid enumerating present && functional devices that are not enabled. Signed-off-by: James Morse <james.morse@xxxxxxx> Tested-by: Miguel Luis <miguel.luis@xxxxxxxxxx> Tested-by: Vishnu Pajjuri <vishnu@xxxxxxxxxxxxxxxxxxxxxx> Tested-by: Jianyong Wu <jianyong.wu@xxxxxxx> Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx> --- If this change causes problems on deployed hardware, I suggest an arch opt-in: ACPI_IGNORE_STA_ENABLED, that causes acpi_dev_ready_for_enumeration() to only check the present bit. Changes since RFC v2: * Incorporate comment suggestion by Gavin Shan. Other review comments from Jonathan Cameron not yet addressed. --- drivers/acpi/device_pm.c | 2 +- drivers/acpi/device_sysfs.c | 2 +- drivers/acpi/internal.h | 1 - drivers/acpi/property.c | 2 +- drivers/acpi/scan.c | 24 ++++++++++++++---------- 5 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 3b4d048c4941..e3c80f3b3b57 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -313,7 +313,7 @@ int acpi_bus_init_power(struct acpi_device *device) return -EINVAL; device->power.state = ACPI_STATE_UNKNOWN; - if (!acpi_device_is_present(device)) { + if (!acpi_dev_ready_for_enumeration(device)) { device->flags.initialized = false; return -ENXIO; } diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c index 23373faa35ec..a0256d2493a7 100644 --- a/drivers/acpi/device_sysfs.c +++ b/drivers/acpi/device_sysfs.c @@ -141,7 +141,7 @@ static int create_pnp_modalias(const struct acpi_device *acpi_dev, char *modalia struct acpi_hardware_id *id; /* Avoid unnecessarily loading modules for non present devices. */ - if (!acpi_device_is_present(acpi_dev)) + if (!acpi_dev_ready_for_enumeration(acpi_dev)) return 0; /* diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 866c7c4ed233..a1b45e345bcc 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -107,7 +107,6 @@ int acpi_device_setup_files(struct acpi_device *dev); void acpi_device_remove_files(struct acpi_device *dev); void acpi_device_add_finalize(struct acpi_device *device); void acpi_free_pnp_ids(struct acpi_device_pnp *pnp); -bool acpi_device_is_present(const struct acpi_device *adev); bool acpi_device_is_battery(struct acpi_device *adev); bool acpi_device_is_first_physical_node(struct acpi_device *adev, const struct device *dev); diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c index 6979a3f9f90a..14d6948fd88a 100644 --- a/drivers/acpi/property.c +++ b/drivers/acpi/property.c @@ -1420,7 +1420,7 @@ static bool acpi_fwnode_device_is_available(const struct fwnode_handle *fwnode) if (!is_acpi_device_node(fwnode)) return false; - return acpi_device_is_present(to_acpi_device_node(fwnode)); + return acpi_dev_ready_for_enumeration(to_acpi_device_node(fwnode)); } static const void * diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 02bb2cce423f..728649a2a251 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -304,7 +304,7 @@ static int acpi_scan_device_check(struct acpi_device *adev) int error; acpi_bus_get_status(adev); - if (acpi_device_is_present(adev)) { + if (acpi_dev_ready_for_enumeration(adev)) { /* * This function is only called for device objects for which * matching scan handlers exist. The only situation in which @@ -338,7 +338,7 @@ static int acpi_scan_bus_check(struct acpi_device *adev, void *not_used) int error; acpi_bus_get_status(adev); - if (!acpi_device_is_present(adev)) { + if (!acpi_dev_ready_for_enumeration(adev)) { acpi_scan_device_not_enumerated(adev); return 0; } @@ -1913,11 +1913,6 @@ static bool acpi_device_should_be_hidden(acpi_handle handle) return true; } -bool acpi_device_is_present(const struct acpi_device *adev) -{ - return adev->status.present || adev->status.functional; -} - static bool acpi_scan_handler_matching(struct acpi_scan_handler *handler, const char *idstr, const struct acpi_device_id **matchid) @@ -2381,16 +2376,25 @@ EXPORT_SYMBOL_GPL(acpi_dev_clear_dependencies); * acpi_dev_ready_for_enumeration - Check if the ACPI device is ready for enumeration * @device: Pointer to the &struct acpi_device to check * - * Check if the device is present and has no unmet dependencies. + * Check if the device is functional or enabled and has no unmet dependencies. * - * Return true if the device is ready for enumeratino. Otherwise, return false. + * Return true if the device is ready for enumeration. Otherwise, return false. */ bool acpi_dev_ready_for_enumeration(const struct acpi_device *device) { if (device->flags.honor_deps && device->dep_unmet) return false; - return acpi_device_is_present(device); + /* + * ACPI 6.5's 6.3.7 "_STA (Device Status)" allows firmware to return + * (!present && functional) for certain types of devices that should be + * enumerated. Note that the enabled bit can't be sert until the present + * bit is set. + */ + if (device->status.present) + return device->status.enabled; + else + return device->status.functional; } EXPORT_SYMBOL_GPL(acpi_dev_ready_for_enumeration); -- 2.30.2
![]() |