Re: [PATCH v6 5/6] fbdev: Move framebuffer I/O helpers into <asm/fb.h>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 11, 2023, at 15:22, Artur Rojek wrote:
> On 2023-05-11 14:35, Geert Uytterhoeven wrote:
>> 
>> CC Artur, who's working on HP Jornada 680.
> Thanks for CC'ing me - I faced this exact issue while working on my
> (still not upstreamed) hd6446x PCMCIA controller driver. The PCMCIA
> subsystem uses `inb/outb`, which expect the `sh_io_port_base` to be set
> to something else than the default `-1`. At first I tried to set it to
> `0xa0000000`, so that all I/O goes through the fixed, non-cacheable P2
> area. That however broke some other driver code (I had no time to debug
> which one). Eventually I ended up taking a suggestion from a MIPS PCMCIA
> driver [1] and simply substract the broken `sh_io_port_base` address
> from `HD64461_IOBASE`, as the base for `socket.io_offset`. This way all
> the PCMCIA `inb/outb` accesses are absolute, no matter what the
> `sh_io_port_base` is set to. This of course is a very ugly solution and
> we should instead fix the root cause of this mess. I will have a better
> look at this patch set and the problem at hand at a later date.
>
> Cheers,
> Artur
>
> [1] 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pcmcia/db1xxx_ss.c?h=v6.4-rc1#n527

I think the best fix would be to change all those drivers away
from using inb/outb to readb/writeb, except when they access the
actual PCMCIA I/O space behind the bridge.

On most of the modern architectures, inb(addr) now turns into
approximately readb(PCI_IOBASE + addr), with a bit of extra
logic to deal with endianess and barrier semantics.

PCI_IOBASE in turn tends to be a hardcoded virtual address
to which the physical I/O space window gets mapped during
early boot, though you can also #define it to sh_io_port_base
if you want to allocate the virtual address dynamically and
leave the existing logic unchanged.

Setting sh_io_port_base to zero however is a problem for any
driver that passes a small port number into it -- this then
turns into a user space pointer dereference, which is trivially
exploitable.

     Arnd



[Index of Archives]     [Linux Kernel]     [Sparc Linux]     [DCCP]     [Linux ARM]     [Yosemite News]     [Linux SCSI]     [Linux x86_64]     [Linux for Ham Radio]

  Powered by Linux