When I booted from the original elilo.efi binary, the console log was a bit different. I have listed it below. My efi binary seems to have detected some RAM Disk when this one doesn't. Hope this helps. Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 384kB freed Red Hat nash version 4.2.1.6 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading mptbase.ko module Fusion MPT base driver 3.02.18 On 11/9/06, Karthik Gopalakrishnan <karthik.g.krishnan@xxxxxxxxx> wrote:
Hi Matthew.
Here is the complete listing. Sorry about the verbose information.
----------------------------------
fs0:\EFI\redhat> elilo
ELILO boot: Uncompressing Linux... done
Loading initrd initrd-2.6.9-22.EL.img...done
Linux version 2.6.9-22.EL (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc
version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55
EDT 2005
EFI v1.10 by HP: SALsystab=0x743fcf1a938 ACPI 2.0=0x743fd310000
HCDP=0x743fd341838 SMBIOS=0x7fffe000
booting generic kernel on platform hpzx1
Number of logical nodes in system = 2
Number of memory chunks in system = 4
warning: skipping physical page 0
efi.trim_top: ignoring 1288KB of memory at 0x40febfe000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 32KB of memory at 0x40ff142000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 8KB of memory at 0x40ff14a000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 4808KB of memory at 0x40ff14c000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 2664KB of memory at 0x40ff5fe000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 248KB of memory at 0x40ff898000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 784KB of memory at 0x40ff912000 due to granule
hole at 0x40ff000000
efi.trim_top: ignoring 1368KB of memory at 0x40ffa7e000 due to granule
hole at 0x40ff000000
warning: skipping physical page 0
warning: skipping physical page 0
Initial ramdisk at: 0xe0000040fe9fb000 (1708032 bytes)
SAL 3.20: HP Orca/IPF version 6.26
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 16 (level, low) -> CPU 0 (0x0002) vector 48
8 CPUs available, 8 CPUs total
PCDP: v3 at 0xe0000743fd341838
PCDP: serial console at MMIO 0xf0200040000 (ttyS0, options 9600n8)
MCA related initialization done
warning: skipping physical page 0
Virtual mem_map starts at 0xa0007fffc720c000
Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinuz-2.6.9-22.EL
console=ttyS0 rhgb root=LABEL=/ ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes)
Memory: 16593664k/16682912k available (5611k code, 101232k reserved,
2260k data, 384k init)
McKinley Errata 9 workaround not needed; disabling it
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
Boot processor id 0x0/0x2
task migration cache decay timeout: 10 msecs.
CPU 1: synchronized ITC with CPU 0 (last diff 5 cycles, maxerr 443 cycles)
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 763 cycles)
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 763 cycles)
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles)
CPU 5: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 1764 cycles)
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles)
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles)
Brought up 8 CPUs
Total of 8 processors activated (13160.32 BogoMIPS).
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 1664kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [L000] (02:00)
ACPI: PCI Root Bridge [L001] (02:15)
ACPI: PCI Root Bridge [L002] (02:2a)
ACPI: PCI Root Bridge [L003] (02:3f)
ACPI: PCI Root Bridge [L004] (02:54)
ACPI: PCI Root Bridge [L006] (02:69)
ACPI: PCI Root Bridge [L008] (02:7e)
ACPI: PCI Root Bridge [L009] (02:93)
ACPI: PCI Root Bridge [L010] (02:a8)
ACPI: PCI Root Bridge [L011] (02:be)
ACPI: PCI Root Bridge [L012] (02:d4)
ACPI: PCI Root Bridge [L014] (02:ea)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 24 (level, low) -> CPU 1 (0x0102) vector 49
ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49
ACPI: PCI interrupt 0002:00:01.0[A] -> GSI 24 (level, low) -> IRQ 49
GSI 35 (level, low) -> CPU 2 (0x0402) vector 50
ACPI: PCI interrupt 0002:15:01.0[A] -> GSI 35 (level, low) -> IRQ 50
GSI 36 (level, low) -> CPU 3 (0x0502) vector 51
ACPI: PCI interrupt 0002:15:01.1[B] -> GSI 36 (level, low) -> IRQ 51
GSI 57 (level, low) -> CPU 4 (0x0802) vector 52
ACPI: PCI interrupt 0002:40:04.0[A] -> GSI 57 (level, low) -> IRQ 52
GSI 58 (level, low) -> CPU 5 (0x0902) vector 53
ACPI: PCI interrupt 0002:40:04.1[B] -> GSI 58 (level, low) -> IRQ 53
GSI 59 (level, low) -> CPU 6 (0x0c02) vector 54
ACPI: PCI interrupt 0002:40:06.0[A] -> GSI 59 (level, low) -> IRQ 54
GSI 60 (level, low) -> CPU 7 (0x0d02) vector 55
ACPI: PCI interrupt 0002:40:06.1[B] -> GSI 60 (level, low) -> IRQ 55
GSI 90 (level, low) -> CPU 0 (0x0002) vector 56
ACPI: PCI interrupt 0002:7e:01.0[A] -> GSI 90 (level, low) -> IRQ 56
GSI 145 (level, low) -> CPU 1 (0x0102) vector 57
ACPI: PCI interrupt 0002:eb:04.0[A] -> GSI 145 (level, low) -> IRQ 57
GSI 146 (level, low) -> CPU 2 (0x0402) vector 58
ACPI: PCI interrupt 0002:eb:04.1[B] -> GSI 146 (level, low) -> IRQ 58
GSI 147 (level, low) -> CPU 3 (0x0502) vector 59
ACPI: PCI interrupt 0002:eb:06.0[A] -> GSI 147 (level, low) -> IRQ 59
GSI 148 (level, low) -> CPU 4 (0x0802) vector 60
ACPI: PCI interrupt 0002:eb:06.1[B] -> GSI 148 (level, low) -> IRQ 60
IOC: sx1000 0.1 HPA 0xf8220002000 IOVA space 1024Mb at 0x80000000
IOC: sx1000 0.1 HPA 0xf8220003000 IOVA space 1024Mb at 0x80000000
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1163076642.940:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 453B8631FE6159D3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [P016] (supports C1)
ACPI: Processor [P017] (supports C1)
ACPI: Processor [P018] (supports C1)
ACPI: Processor [P019] (supports C1)
ACPI: Processor [P020] (supports C1)
ACPI: Processor [P021] (supports C1)
ACPI: Processor [P022] (supports C1)
ACPI: Processor [P023] (supports C1)
EFI Time Services Driver v0.4
Linux agpgart interface v0.100 (c) Dave Jones
i8042.c: No controller found.
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
tyS0 at MMIO 0xf0200040000 (irq = 49) is a 16550A
ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49
ttyS1 at MMIO 0xf0200040008 (irq = 49) is a 16550A
ttyS2 at MMIO 0xf0200040010 (irq = 49) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 262144 buckets, 4096Kbytes
TCP: Hash tables configured (established 8388608 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
----------------------------------
On 11/9/06, Matthew Wilcox <matthew@xxxxxx> wrote:
> On Thu, Nov 09, 2006 at 06:04:04PM +0530, Karthik Gopalakrishnan wrote:
> > image=vmlinuz-2.6.9-22.EL
> > label=linux
> > initrd=initrd-2.6.9-22.EL.img
> > read-only
> > append="console=ttyS0 rhgb quiet root=LABEL=/"
>
> If you take the "quiet" out, you'll get a lot more information during
> the boot, and we may be able to diagnose your problem.
>
> > fs0:\EFI\redhat> elilo
> >
> > ELILO boot: Uncompressing Linux... done
> > Loading initrd initrd-2.6.9-22.EL.img...done
> > i8042.c: No controller found.
> > ernel panic - not syncing: VFS: Unable to mount root fs on
> > unknown-block(0,0)
> >
> > Any help will be greatly appreciated.
> >
> > Regards,
> > Karthik
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
- To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
|