Hi Matthew. Here is the complete listing. Sorry about the verbose information. ---------------------------------- fs0:\EFI\redhat> elilo ELILO boot: Uncompressing Linux... done Loading initrd initrd-2.6.9-22.EL.img...done Linux version 2.6.9-22.EL (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55 EDT 2005 EFI v1.10 by HP: SALsystab=0x743fcf1a938 ACPI 2.0=0x743fd310000 HCDP=0x743fd341838 SMBIOS=0x7fffe000 booting generic kernel on platform hpzx1 Number of logical nodes in system = 2 Number of memory chunks in system = 4 warning: skipping physical page 0 efi.trim_top: ignoring 1288KB of memory at 0x40febfe000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 32KB of memory at 0x40ff142000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 8KB of memory at 0x40ff14a000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 4808KB of memory at 0x40ff14c000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 2664KB of memory at 0x40ff5fe000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 248KB of memory at 0x40ff898000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 784KB of memory at 0x40ff912000 due to granule hole at 0x40ff000000 efi.trim_top: ignoring 1368KB of memory at 0x40ffa7e000 due to granule hole at 0x40ff000000 warning: skipping physical page 0 warning: skipping physical page 0 Initial ramdisk at: 0xe0000040fe9fb000 (1708032 bytes) SAL 3.20: HP Orca/IPF version 6.26 SAL Platform features: None SAL: AP wakeup using external interrupt vector 0xff ACPI: Local APIC address c0000000fee00000 GSI 16 (level, low) -> CPU 0 (0x0002) vector 48 8 CPUs available, 8 CPUs total PCDP: v3 at 0xe0000743fd341838 PCDP: serial console at MMIO 0xf0200040000 (ttyS0, options 9600n8) MCA related initialization done warning: skipping physical page 0 Virtual mem_map starts at 0xa0007fffc720c000 Built 1 zonelists Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinuz-2.6.9-22.EL console=ttyS0 rhgb root=LABEL=/ ro PID hash table entries: 4096 (order: 12, 131072 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes) Memory: 16593664k/16682912k available (5611k code, 101232k reserved, 2260k data, 384k init) McKinley Errata 9 workaround not needed; disabling it Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 1024 (order: 0, 16384 bytes) Boot processor id 0x0/0x2 task migration cache decay timeout: 10 msecs. CPU 1: synchronized ITC with CPU 0 (last diff 5 cycles, maxerr 443 cycles) CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 763 cycles) CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 763 cycles) CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) CPU 5: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 1764 cycles) CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 1764 cycles) Brought up 8 CPUs Total of 8 processors activated (13160.32 BogoMIPS). checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 1664kB freed NET: Registered protocol family 16 ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing ACPI: PCI Root Bridge [L000] (02:00) ACPI: PCI Root Bridge [L001] (02:15) ACPI: PCI Root Bridge [L002] (02:2a) ACPI: PCI Root Bridge [L003] (02:3f) ACPI: PCI Root Bridge [L004] (02:54) ACPI: PCI Root Bridge [L006] (02:69) ACPI: PCI Root Bridge [L008] (02:7e) ACPI: PCI Root Bridge [L009] (02:93) ACPI: PCI Root Bridge [L010] (02:a8) ACPI: PCI Root Bridge [L011] (02:be) ACPI: PCI Root Bridge [L012] (02:d4) ACPI: PCI Root Bridge [L014] (02:ea) usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing GSI 24 (level, low) -> CPU 1 (0x0102) vector 49 ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49 ACPI: PCI interrupt 0002:00:01.0[A] -> GSI 24 (level, low) -> IRQ 49 GSI 35 (level, low) -> CPU 2 (0x0402) vector 50 ACPI: PCI interrupt 0002:15:01.0[A] -> GSI 35 (level, low) -> IRQ 50 GSI 36 (level, low) -> CPU 3 (0x0502) vector 51 ACPI: PCI interrupt 0002:15:01.1[B] -> GSI 36 (level, low) -> IRQ 51 GSI 57 (level, low) -> CPU 4 (0x0802) vector 52 ACPI: PCI interrupt 0002:40:04.0[A] -> GSI 57 (level, low) -> IRQ 52 GSI 58 (level, low) -> CPU 5 (0x0902) vector 53 ACPI: PCI interrupt 0002:40:04.1[B] -> GSI 58 (level, low) -> IRQ 53 GSI 59 (level, low) -> CPU 6 (0x0c02) vector 54 ACPI: PCI interrupt 0002:40:06.0[A] -> GSI 59 (level, low) -> IRQ 54 GSI 60 (level, low) -> CPU 7 (0x0d02) vector 55 ACPI: PCI interrupt 0002:40:06.1[B] -> GSI 60 (level, low) -> IRQ 55 GSI 90 (level, low) -> CPU 0 (0x0002) vector 56 ACPI: PCI interrupt 0002:7e:01.0[A] -> GSI 90 (level, low) -> IRQ 56 GSI 145 (level, low) -> CPU 1 (0x0102) vector 57 ACPI: PCI interrupt 0002:eb:04.0[A] -> GSI 145 (level, low) -> IRQ 57 GSI 146 (level, low) -> CPU 2 (0x0402) vector 58 ACPI: PCI interrupt 0002:eb:04.1[B] -> GSI 146 (level, low) -> IRQ 58 GSI 147 (level, low) -> CPU 3 (0x0502) vector 59 ACPI: PCI interrupt 0002:eb:06.0[A] -> GSI 147 (level, low) -> IRQ 59 GSI 148 (level, low) -> CPU 4 (0x0802) vector 60 ACPI: PCI interrupt 0002:eb:06.1[B] -> GSI 148 (level, low) -> IRQ 60 IOC: sx1000 0.1 HPA 0xf8220002000 IOVA space 1024Mb at 0x80000000 IOC: sx1000 0.1 HPA 0xf8220003000 IOVA space 1024Mb at 0x80000000 perfmon: version 2.0 IRQ 238 perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered audit: initializing netlink socket (disabled) audit(1163076642.940:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 453B8631FE6159D3 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [P016] (supports C1) ACPI: Processor [P017] (supports C1) ACPI: Processor [P018] (supports C1) ACPI: Processor [P019] (supports C1) ACPI: Processor [P020] (supports C1) ACPI: Processor [P021] (supports C1) ACPI: Processor [P022] (supports C1) ACPI: Processor [P023] (supports C1) EFI Time Services Driver v0.4 Linux agpgart interface v0.100 (c) Dave Jones i8042.c: No controller found. Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled tyS0 at MMIO 0xf0200040000 (irq = 49) is a 16550A ACPI: PCI interrupt 0002:00:00.0[A] -> GSI 24 (level, low) -> IRQ 49 ttyS1 at MMIO 0xf0200040008 (irq = 49) is a 16550A ttyS2 at MMIO 0xf0200040010 (irq = 49) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EFI Variables Facility v0.08 2004-May-17 NET: Registered protocol family 2 IP: routing cache hash table of 262144 buckets, 4096Kbytes TCP: Hash tables configured (established 8388608 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ---------------------------------- On 11/9/06, Matthew Wilcox <matthew@xxxxxx> wrote:
On Thu, Nov 09, 2006 at 06:04:04PM +0530, Karthik Gopalakrishnan wrote: > image=vmlinuz-2.6.9-22.EL > label=linux > initrd=initrd-2.6.9-22.EL.img > read-only > append="console=ttyS0 rhgb quiet root=LABEL=/" If you take the "quiet" out, you'll get a lot more information during the boot, and we may be able to diagnose your problem. > fs0:\EFI\redhat> elilo > > ELILO boot: Uncompressing Linux... done > Loading initrd initrd-2.6.9-22.EL.img...done > i8042.c: No controller found. > ernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(0,0) > > Any help will be greatly appreciated. > > Regards, > Karthik > - > To unsubscribe from this list: send the line "unsubscribe linux-ia64" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
- To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |