Fix MSI-related build problems on ia64. Move arch/ia64/sn/pci/msi.c to drivers/pci/msi-altix.c Move struct msi_ops in drivers/pci/msi.h to the top of the file so asm/msi.h can make use of the declaration. Clean up msi platform defintions in machvec.h (thanks to j-nomura@xxxxxxxxxxxxx for the patch to do that). Signed-off-by: Mark Maule <maule@xxxxxxx> Index: maule/arch/ia64/sn/pci/Makefile =================================================================== --- maule.orig/arch/ia64/sn/pci/Makefile 2006-03-20 11:07:30.602099680 -0600 +++ maule/arch/ia64/sn/pci/Makefile 2006-03-20 11:08:08.130604825 -0600 @@ -10,4 +10,3 @@ CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/ -obj-$(CONFIG_PCI_MSI) += msi.o Index: maule/arch/ia64/sn/pci/msi.c =================================================================== --- maule.orig/arch/ia64/sn/pci/msi.c 2006-03-20 11:07:30.602099680 -0600 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,210 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/cpumask.h> - -#include <asm/msi.h> - -#include <asm/sn/addrs.h> -#include <asm/sn/intr.h> -#include <asm/sn/pcibus_provider_defs.h> -#include <asm/sn/pcidev.h> -#include <asm/sn/nodepda.h> - -struct sn_msi_info { - u64 pci_addr; - struct sn_irq_info *sn_irq_info; -}; - -static struct sn_msi_info *sn_msi_info; - -static void -sn_msi_teardown(unsigned int vector) -{ - nasid_t nasid; - int widget; - struct pci_dev *pdev; - struct pcidev_info *sn_pdev; - struct sn_irq_info *sn_irq_info; - struct pcibus_bussoft *bussoft; - struct sn_pcibus_provider *provider; - - sn_irq_info = sn_msi_info[vector].sn_irq_info; - if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) - return; - - sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; - pdev = sn_pdev->pdi_linux_pcidev; - provider = SN_PCIDEV_BUSPROVIDER(pdev); - - (*provider->dma_unmap)(pdev, - sn_msi_info[vector].pci_addr, - PCI_DMA_FROMDEVICE); - sn_msi_info[vector].pci_addr = 0; - - bussoft = SN_PCIDEV_BUSSOFT(pdev); - nasid = NASID_GET(bussoft->bs_base); - widget = (nasid & 1) ? - TIO_SWIN_WIDGETNUM(bussoft->bs_base) : - SWIN_WIDGETNUM(bussoft->bs_base); - - sn_intr_free(nasid, widget, sn_irq_info); - sn_msi_info[vector].sn_irq_info = NULL; - - return; -} - -int -sn_msi_setup(struct pci_dev *pdev, unsigned int vector, - u32 *addr_hi, u32 *addr_lo, u32 *data) -{ - int widget; - int status; - nasid_t nasid; - u64 bus_addr; - struct sn_irq_info *sn_irq_info; - struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev); - struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev); - - if (bussoft == NULL) - return -EINVAL; - - if (provider == NULL || provider->dma_map_consistent == NULL) - return -EINVAL; - - /* - * Set up the vector plumbing. Let the prom (via sn_intr_alloc) - * decide which cpu to direct this msi at by default. - */ - - nasid = NASID_GET(bussoft->bs_base); - widget = (nasid & 1) ? - TIO_SWIN_WIDGETNUM(bussoft->bs_base) : - SWIN_WIDGETNUM(bussoft->bs_base); - - sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (! sn_irq_info) - return -ENOMEM; - - status = sn_intr_alloc(nasid, widget, sn_irq_info, vector, -1, -1); - if (status) { - kfree(sn_irq_info); - return -ENOMEM; - } - - sn_irq_info->irq_int_bit = -1; /* mark this as an MSI irq */ - sn_irq_fixup(pdev, sn_irq_info); - - /* Prom probably should fill these in, but doesn't ... */ - sn_irq_info->irq_bridge_type = bussoft->bs_asic_type; - sn_irq_info->irq_bridge = (void *)bussoft->bs_base; - - /* - * Map the xio address into bus space - */ - bus_addr = (*provider->dma_map_consistent)(pdev, - sn_irq_info->irq_xtalkaddr, - sizeof(sn_irq_info->irq_xtalkaddr), - SN_DMA_MSI|SN_DMA_ADDR_XIO); - if (! bus_addr) { - sn_intr_free(nasid, widget, sn_irq_info); - kfree(sn_irq_info); - return -ENOMEM; - } - - sn_msi_info[vector].sn_irq_info = sn_irq_info; - sn_msi_info[vector].pci_addr = bus_addr; - - *addr_hi = (u32)(bus_addr >> 32); - *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); - - /* - * In the SN platform, bit 16 is a "send vector" bit which - * must be present in order to move the vector through the system. - */ - *data = 0x100 + (unsigned int)vector; - -#ifdef CONFIG_SMP - set_irq_affinity_info((vector & 0xff), sn_irq_info->irq_cpuid, 0); -#endif - - return 0; -} - -static void -sn_msi_target(unsigned int vector, unsigned int cpu, - u32 *addr_hi, u32 *addr_lo) -{ - int slice; - nasid_t nasid; - u64 bus_addr; - struct pci_dev *pdev; - struct pcidev_info *sn_pdev; - struct sn_irq_info *sn_irq_info; - struct sn_irq_info *new_irq_info; - struct sn_pcibus_provider *provider; - - sn_irq_info = sn_msi_info[vector].sn_irq_info; - if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) - return; - - /* - * Release XIO resources for the old MSI PCI address - */ - - sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; - pdev = sn_pdev->pdi_linux_pcidev; - provider = SN_PCIDEV_BUSPROVIDER(pdev); - - bus_addr = (u64)(*addr_hi) << 32 | (u64)(*addr_lo); - (*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE); - sn_msi_info[vector].pci_addr = 0; - - nasid = cpuid_to_nasid(cpu); - slice = cpuid_to_slice(cpu); - - new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice); - sn_msi_info[vector].sn_irq_info = new_irq_info; - if (new_irq_info == NULL) - return; - - /* - * Map the xio address into bus space - */ - - bus_addr = (*provider->dma_map_consistent)(pdev, - new_irq_info->irq_xtalkaddr, - sizeof(new_irq_info->irq_xtalkaddr), - SN_DMA_MSI|SN_DMA_ADDR_XIO); - - sn_msi_info[vector].pci_addr = bus_addr; - *addr_hi = (u32)(bus_addr >> 32); - *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); -} - -struct msi_ops sn_msi_ops = { - .setup = sn_msi_setup, - .teardown = sn_msi_teardown, -#ifdef CONFIG_SMP - .target = sn_msi_target, -#endif -}; - -int -sn_msi_init(void) -{ - sn_msi_info = - kzalloc(sizeof(struct sn_msi_info) * NR_VECTORS, GFP_KERNEL); - if (! sn_msi_info) - return -ENOMEM; - - msi_register(&sn_msi_ops); - return 0; -} Index: maule/drivers/pci/Makefile =================================================================== --- maule.orig/drivers/pci/Makefile 2006-03-20 11:07:30.602099680 -0600 +++ maule/drivers/pci/Makefile 2006-03-20 11:08:08.130604825 -0600 @@ -26,7 +26,19 @@ obj-$(CONFIG_PPC64) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o -obj-$(CONFIG_PCI_MSI) += msi.o msi-apic.o + +ifdef CONFIG_PCI_MSI +obj-y += msi.o msi-apic.o + +ifdef CONFIG_IA64_GENERIC +obj-y += msi-altix.o +else +ifdef CONFIG_IA64_SGI_SN2 +obj-y += msi-altix.o +endif +endif + +endif #CONFIG_PCI_MSI # # ACPI Related PCI FW Functions Index: maule/drivers/pci/msi-altix.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ maule/drivers/pci/msi-altix.c 2006-03-20 11:30:42.572360932 -0600 @@ -0,0 +1,210 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/cpumask.h> + +#include <asm/sn/addrs.h> +#include <asm/sn/intr.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/nodepda.h> + +#include "msi.h" + +struct sn_msi_info { + u64 pci_addr; + struct sn_irq_info *sn_irq_info; +}; + +static struct sn_msi_info *sn_msi_info; + +static void +sn_msi_teardown(unsigned int vector) +{ + nasid_t nasid; + int widget; + struct pci_dev *pdev; + struct pcidev_info *sn_pdev; + struct sn_irq_info *sn_irq_info; + struct pcibus_bussoft *bussoft; + struct sn_pcibus_provider *provider; + + sn_irq_info = sn_msi_info[vector].sn_irq_info; + if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) + return; + + sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + pdev = sn_pdev->pdi_linux_pcidev; + provider = SN_PCIDEV_BUSPROVIDER(pdev); + + (*provider->dma_unmap)(pdev, + sn_msi_info[vector].pci_addr, + PCI_DMA_FROMDEVICE); + sn_msi_info[vector].pci_addr = 0; + + bussoft = SN_PCIDEV_BUSSOFT(pdev); + nasid = NASID_GET(bussoft->bs_base); + widget = (nasid & 1) ? + TIO_SWIN_WIDGETNUM(bussoft->bs_base) : + SWIN_WIDGETNUM(bussoft->bs_base); + + sn_intr_free(nasid, widget, sn_irq_info); + sn_msi_info[vector].sn_irq_info = NULL; + + return; +} + +int +sn_msi_setup(struct pci_dev *pdev, unsigned int vector, + u32 *addr_hi, u32 *addr_lo, u32 *data) +{ + int widget; + int status; + nasid_t nasid; + u64 bus_addr; + struct sn_irq_info *sn_irq_info; + struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev); + struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev); + + if (bussoft == NULL) + return -EINVAL; + + if (provider == NULL || provider->dma_map_consistent == NULL) + return -EINVAL; + + /* + * Set up the vector plumbing. Let the prom (via sn_intr_alloc) + * decide which cpu to direct this msi at by default. + */ + + nasid = NASID_GET(bussoft->bs_base); + widget = (nasid & 1) ? + TIO_SWIN_WIDGETNUM(bussoft->bs_base) : + SWIN_WIDGETNUM(bussoft->bs_base); + + sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (! sn_irq_info) + return -ENOMEM; + + status = sn_intr_alloc(nasid, widget, sn_irq_info, vector, -1, -1); + if (status) { + kfree(sn_irq_info); + return -ENOMEM; + } + + sn_irq_info->irq_int_bit = -1; /* mark this as an MSI irq */ + sn_irq_fixup(pdev, sn_irq_info); + + /* Prom probably should fill these in, but doesn't ... */ + sn_irq_info->irq_bridge_type = bussoft->bs_asic_type; + sn_irq_info->irq_bridge = (void *)bussoft->bs_base; + + /* + * Map the xio address into bus space + */ + bus_addr = (*provider->dma_map_consistent)(pdev, + sn_irq_info->irq_xtalkaddr, + sizeof(sn_irq_info->irq_xtalkaddr), + SN_DMA_MSI|SN_DMA_ADDR_XIO); + if (! bus_addr) { + sn_intr_free(nasid, widget, sn_irq_info); + kfree(sn_irq_info); + return -ENOMEM; + } + + sn_msi_info[vector].sn_irq_info = sn_irq_info; + sn_msi_info[vector].pci_addr = bus_addr; + + *addr_hi = (u32)(bus_addr >> 32); + *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); + + /* + * In the SN platform, bit 16 is a "send vector" bit which + * must be present in order to move the vector through the system. + */ + *data = 0x100 + (unsigned int)vector; + +#ifdef CONFIG_SMP + set_irq_affinity_info((vector & 0xff), sn_irq_info->irq_cpuid, 0); +#endif + + return 0; +} + +static void +sn_msi_target(unsigned int vector, unsigned int cpu, + u32 *addr_hi, u32 *addr_lo) +{ + int slice; + nasid_t nasid; + u64 bus_addr; + struct pci_dev *pdev; + struct pcidev_info *sn_pdev; + struct sn_irq_info *sn_irq_info; + struct sn_irq_info *new_irq_info; + struct sn_pcibus_provider *provider; + + sn_irq_info = sn_msi_info[vector].sn_irq_info; + if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) + return; + + /* + * Release XIO resources for the old MSI PCI address + */ + + sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + pdev = sn_pdev->pdi_linux_pcidev; + provider = SN_PCIDEV_BUSPROVIDER(pdev); + + bus_addr = (u64)(*addr_hi) << 32 | (u64)(*addr_lo); + (*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE); + sn_msi_info[vector].pci_addr = 0; + + nasid = cpuid_to_nasid(cpu); + slice = cpuid_to_slice(cpu); + + new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice); + sn_msi_info[vector].sn_irq_info = new_irq_info; + if (new_irq_info == NULL) + return; + + /* + * Map the xio address into bus space + */ + + bus_addr = (*provider->dma_map_consistent)(pdev, + new_irq_info->irq_xtalkaddr, + sizeof(new_irq_info->irq_xtalkaddr), + SN_DMA_MSI|SN_DMA_ADDR_XIO); + + sn_msi_info[vector].pci_addr = bus_addr; + *addr_hi = (u32)(bus_addr >> 32); + *addr_lo = (u32)(bus_addr & 0x00000000ffffffff); +} + +struct msi_ops sn_msi_ops = { + .setup = sn_msi_setup, + .teardown = sn_msi_teardown, +#ifdef CONFIG_SMP + .target = sn_msi_target, +#endif +}; + +int +sn_msi_init(void) +{ + sn_msi_info = + kzalloc(sizeof(struct sn_msi_info) * NR_VECTORS, GFP_KERNEL); + if (! sn_msi_info) + return -ENOMEM; + + msi_register(&sn_msi_ops); + return 0; +} Index: maule/drivers/pci/msi.h =================================================================== --- maule.orig/drivers/pci/msi.h 2006-03-17 15:56:47.985483772 -0600 +++ maule/drivers/pci/msi.h 2006-03-20 12:08:49.730770784 -0600 @@ -6,6 +6,65 @@ #ifndef MSI_H #define MSI_H +/* + * MSI operation vector. Used by the msi core code (drivers/pci/msi.c) + * to abstract platform-specific tasks relating to MSI address generation + * and resource management. + */ +struct msi_ops { + /** + * setup - generate an MSI bus address and data for a given vector + * @pdev: PCI device context (in) + * @vector: vector allocated by the msi core (in) + * @addr_hi: upper 32 bits of PCI bus MSI address (out) + * @addr_lo: lower 32 bits of PCI bus MSI address (out) + * @data: MSI data payload (out) + * + * Description: The setup op is used to generate a PCI bus addres and + * data which the msi core will program into the card MSI capability + * registers. The setup routine is responsible for picking an initial + * cpu to target the MSI at. The setup routine is responsible for + * examining pdev to determine the MSI capabilities of the card and + * generating a suitable address/data. The setup routine is + * responsible for allocating and tracking any system resources it + * needs to route the MSI to the cpu it picks, and for associating + * those resources with the passed in vector. + * + * Returns 0 if the MSI address/data was successfully setup. + */ + int (*setup) (struct pci_dev *pdev, unsigned int vector, + u32 *addr_hi, u32 *addr_lo, u32 *data); + + /** + * teardown - release resources allocated by setup + * @vector: vector context for resources (in) + * + * Description: The teardown op is used to release any resources + * that were allocated in the setup routine associated with the passed + * in vector. + */ + void (*teardown) (unsigned int vector); + + /** + * target - retarget an MSI at a different cpu + * @vector: vector context for resources (in) + * @cpu: new cpu to direct vector at (in) + * @addr_hi: new value of PCI bus upper 32 bits (in/out) + * @addr_lo: new value of PCI bus lower 32 bits (in/out) + * + * Description: The target op is used to redirect an MSI vector + * at a different cpu. addr_hi/addr_lo coming in are the existing + * values that the MSI core has programmed into the card. The + * target code is responsible for freeing any resources (if any) + * associated with the old address, and generating a new PCI bus + * addr_hi/addr_lo that will redirect the vector at the indicated cpu. + */ + void (*target) (unsigned int vector, unsigned int cpu, + u32 *addr_hi, u32 *addr_lo); +}; + +extern int msi_register(struct msi_ops *); + #include <asm/msi.h> /* @@ -83,61 +142,4 @@ struct pci_dev *dev; }; -/* - * MSI operation vector. Used by the msi core code (drivers/pci/msi.c) - * to abstract platform-specific tasks relating to MSI address generation - * and resource management. - */ -struct msi_ops { - /** - * setup - generate an MSI bus address and data for a given vector - * @pdev: PCI device context (in) - * @vector: vector allocated by the msi core (in) - * @addr_hi: upper 32 bits of PCI bus MSI address (out) - * @addr_lo: lower 32 bits of PCI bus MSI address (out) - * @data: MSI data payload (out) - * - * Description: The setup op is used to generate a PCI bus addres and - * data which the msi core will program into the card MSI capability - * registers. The setup routine is responsible for picking an initial - * cpu to target the MSI at. The setup routine is responsible for - * examining pdev to determine the MSI capabilities of the card and - * generating a suitable address/data. The setup routine is - * responsible for allocating and tracking any system resources it - * needs to route the MSI to the cpu it picks, and for associating - * those resources with the passed in vector. - * - * Returns 0 if the MSI address/data was successfully setup. - */ - int (*setup) (struct pci_dev *pdev, unsigned int vector, - u32 *addr_hi, u32 *addr_lo, u32 *data); - - /** - * teardown - release resources allocated by setup - * @vector: vector context for resources (in) - * - * Description: The teardown op is used to release any resources - * that were allocated in the setup routine associated with the passed - * in vector. - */ - void (*teardown) (unsigned int vector); - - /** - * target - retarget an MSI at a different cpu - * @vector: vector context for resources (in) - * @cpu: new cpu to direct vector at (in) - * @addr_hi: new value of PCI bus upper 32 bits (in/out) - * @addr_lo: new value of PCI bus lower 32 bits (in/out) - * - * Description: The target op is used to redirect an MSI vector - * at a different cpu. addr_hi/addr_lo coming in are the existing - * values that the MSI core has programmed into the card. The - * target code is responsible for freeing any resources (if any) - * associated with the old address, and generating a new PCI bus - * addr_hi/addr_lo that will redirect the vector at the indicated cpu. - */ - void (*target) (unsigned int vector, unsigned int cpu, - u32 *addr_hi, u32 *addr_lo); -}; - #endif /* MSI_H */ Index: maule/drivers/pci/pci.h =================================================================== --- maule.orig/drivers/pci/pci.h 2006-03-17 15:56:47.989484242 -0600 +++ maule/drivers/pci/pci.h 2006-03-20 11:29:45.621538709 -0600 @@ -51,11 +51,9 @@ struct msi_ops; #ifdef CONFIG_PCI_MSI void disable_msi_mode(struct pci_dev *dev, int pos, int type); -int msi_register(struct msi_ops *ops); void pci_no_msi(void); #else static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { } -static inline int msi_register(struct msi_ops *ops) { return 0; } static inline void pci_no_msi(void) { } #endif Index: maule/include/asm-ia64/machvec.h =================================================================== --- maule.orig/include/asm-ia64/machvec.h 2006-03-17 15:56:50.153738431 -0600 +++ maule/include/asm-ia64/machvec.h 2006-03-20 11:41:25.865449097 -0600 @@ -404,12 +404,7 @@ # define platform_migrate machvec_noop_task #endif #ifndef platform_msi_init -#ifdef CONFIG_PCI_MSI -#include <asm/msi.h> /* pull in ia64_msi_init() */ -# define platform_msi_init ia64_msi_init -#else # define platform_msi_init NULL -#endif /* CONFIG_PCI_MSI */ #endif #endif /* _ASM_IA64_MACHVEC_H */ Index: maule/include/asm-ia64/msi.h =================================================================== --- maule.orig/include/asm-ia64/msi.h 2006-03-20 11:30:18.137433515 -0600 +++ maule/include/asm-ia64/msi.h 2006-03-20 12:06:40.671281126 -0600 @@ -16,13 +16,14 @@ extern struct msi_ops msi_apic_ops; -/* default ia64 msi init routine */ -static inline int ia64_msi_init(void) +static inline int msi_arch_init(void) { + if (platform_msi_init) + return platform_msi_init(); + + /* default ia64 ops */ msi_register(&msi_apic_ops); return 0; } -#define msi_arch_init platform_msi_init /* in asm/machvec.h */ - #endif /* ASM_MSI_H */ - : send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |