On 28/02/2025 17:45, Pratap Nirujogi wrote:
> config I2C_DESIGNWARE_AMDPSP
> bool "AMD PSP I2C semaphore support"
> depends on ACPI
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 1c2a4510abe4..cfe53038df69 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
> i2c-designware-platform-y := i2c-designware-platdrv.o
> i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP) += i2c-designware-amdpsp.o
> i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
> +obj-$(CONFIG_I2C_DESIGNWARE_AMDISP) += i2c-designware-amdisp.o
> obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
> i2c-designware-pci-y := i2c-designware-pcidrv.o
> obj-$(CONFIG_I2C_DIGICOLOR) += i2c-digicolor.o
> diff --git a/drivers/i2c/busses/i2c-designware-amdisp.c b/drivers/i2c/busses/i2c-designware-amdisp.c
> new file mode 100644
> index 000000000000..dc90510a440b
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-designware-amdisp.c
> @@ -0,0 +1,266 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright 2024-2025 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Don't add custom license boilerplate.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/suspend.h>
> +#include <linux/units.h>
> +
> +#include "i2c-designware-core.h"
> +#include "i2c-designware-amdisp.h"
> +
> +#define AMD_ISP_I2C_INPUT_CLK 100 //100 Mhz
> +
> +#define to_amd_isp_i2c_dev(dev) \
> + ((struct amd_isp_i2c_dev *)container_of(dev, struct amd_isp_i2c_dev, dw_dev))
Why do you need to cast? To drop const? That's poor coding.
> +
> +struct amd_isp_i2c_dev {
> + struct dw_i2c_dev dw_dev;
> +};
> +
> +static void amd_isp_dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
> +{
> + pm_runtime_disable(dev->dev);
> +
> + if (dev->shared_with_punit)
> + pm_runtime_put_noidle(dev->dev);
> +}
> +
> +static u32 amd_isp_dw_i2c_get_clk_rate(struct dw_i2c_dev *dev)
> +{
> + return AMD_ISP_I2C_INPUT_CLK * 1000;
> +}
> +
> +static int amd_isp_dw_i2c_plat_probe(struct platform_device *pdev)
> +{
> + struct i2c_adapter *adap;
> + struct amd_isp_i2c_dev *isp_i2c_dev;
> + struct dw_i2c_dev *dev;
> + int ret;
> +
> + isp_i2c_dev = devm_kzalloc(&pdev->dev, sizeof(struct amd_isp_i2c_dev),
sizeof(*)
> + GFP_KERNEL);
> + if (!isp_i2c_dev)
> + return -ENOMEM;
> +
> + dev = &isp_i2c_dev->dw_dev;
> + dev->dev = &pdev->dev;
> +
> + /**
Not a kerneldoc.
Please run standard kernel tools for static analysis, like coccinelle,
smatch and sparse, and fix reported warnings. Also please check for
warnings when building with W=1. Most of these commands (checks or W=1
build) can build specific targets, like some directory, to narrow the
scope to only your code. The code here looks like it needs a fix. Feel
free to get in touch if the warning is not clear.
> + * Use the polling mode to send/receive the data, because
> + * no IRQ connection from ISP I2C
> + */
> + dev->flags |= ACCESS_POLLING;
> + platform_set_drvdata(pdev, dev);
> +
> + dev->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + ret = isp_power_set(true);
> + if (ret) {
> + dev_err(dev->dev, "unable to turn on the amdisp i2c power:%d\n", ret);
Syntax is return dev_err_probe()
> + return ret;
> + }
> +
> + dev->get_clk_rate_khz = amd_isp_dw_i2c_get_clk_rate;
> + ret = i2c_dw_fw_parse_and_configure(dev);
> + if (ret)
> + goto exit;
> +
> + i2c_dw_configure(dev);
> +
> + adap = &dev->adapter;
> + adap->owner = THIS_MODULE;
> + ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
> + adap->dev.of_node = pdev->dev.of_node;
> + /* arbitrary large number to avoid any conflicts */
> + adap->nr = 99;
> +
> + if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
> + dev_pm_set_driver_flags(&pdev->dev,
> + DPM_FLAG_SMART_PREPARE);
> + } else {
> + dev_pm_set_driver_flags(&pdev->dev,
> + DPM_FLAG_SMART_PREPARE |
> + DPM_FLAG_SMART_SUSPEND);
> + }
> +
> + device_enable_async_suspend(&pdev->dev);
> +
> + /* The code below assumes runtime PM to be disabled. */
> + WARN_ON(pm_runtime_enabled(&pdev->dev));
And how it could be enabled? Drop or fix your driver.
> +
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> +
> + if (dev->shared_with_punit)
> + pm_runtime_get_noresume(&pdev->dev);
> +
> + pm_runtime_enable(&pdev->dev);
> +
> + ret = i2c_dw_probe(dev);
> + if (ret) {
> + dev_err(dev->dev, "i2c_dw_probe failed %d\n", ret);
Use dev_err_probe()
> + goto exit_probe;
> + }
> +
> + isp_power_set(false);
> + return ret;
> +
> +exit_probe:
> + amd_isp_dw_i2c_plat_pm_cleanup(dev);
> + isp_power_set(false);
> +exit:
> + isp_power_set(false);
> + return ret;
> +}
> +
> +static void amd_isp_dw_i2c_plat_remove(struct platform_device *pdev)
> +{
> + struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> +
> + pm_runtime_get_sync(&pdev->dev);
> +
> + i2c_del_adapter(&dev->adapter);
> +
> + i2c_dw_disable(dev);
> +
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_put_sync(&pdev->dev);
> + amd_isp_dw_i2c_plat_pm_cleanup(dev);
> +
> + reset_control_assert(dev->rst);
> +}
> +
> +static int amd_isp_dw_i2c_plat_prepare(struct device *dev)
> +{
> + /*
> + * If the ACPI companion device object is present for this device, it
> + * may be accessed during suspend and resume of other devices via I2C
> + * operation regions, so tell the PM core and middle layers to avoid
> + * skipping system suspend/resume callbacks for it in that case.
> + */
> + return !has_acpi_companion(dev);
> +}
> +
> +static int amd_isp_dw_i2c_plat_runtime_suspend(struct device *dev)
> +{
> + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
> +
> + if (i_dev->shared_with_punit)
> + return 0;
> +
> + i2c_dw_disable(i_dev);
> + i2c_dw_prepare_clk(i_dev, false);
> +
> + return 0;
> +}
> +
> +static int amd_isp_dw_i2c_plat_suspend(struct device *dev)
> +{
> + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
> +
> + i2c_mark_adapter_suspended(&i_dev->adapter);
> +
> + return amd_isp_dw_i2c_plat_runtime_suspend(dev);
> +}
> +
> +static int amd_isp_dw_i2c_plat_runtime_resume(struct device *dev)
> +{
> + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
> +
> + if (!i_dev->shared_with_punit)
> + i2c_dw_prepare_clk(i_dev, true);
> +
> + i_dev->init(i_dev);
> +
> + return 0;
> +}
> +
> +static int amd_isp_dw_i2c_plat_resume(struct device *dev)
> +{
> + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
> +
> + amd_isp_dw_i2c_plat_runtime_resume(dev);
> + i2c_mark_adapter_resumed(&i_dev->adapter);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops amd_isp_dw_i2c_dev_pm_ops = {
> + .prepare = pm_sleep_ptr(amd_isp_dw_i2c_plat_prepare),
> + LATE_SYSTEM_SLEEP_PM_OPS(amd_isp_dw_i2c_plat_suspend, amd_isp_dw_i2c_plat_resume)
> + RUNTIME_PM_OPS(amd_isp_dw_i2c_plat_runtime_suspend, amd_isp_dw_i2c_plat_runtime_resume, NULL)
> +};
> +
> +/* Work with hotplug and coldplug */
> +MODULE_ALIAS("platform:amd_isp_i2c_designware");
> +
> +static struct platform_driver amd_isp_dw_i2c_driver = {
> + .probe = amd_isp_dw_i2c_plat_probe,
> + .remove = amd_isp_dw_i2c_plat_remove,
> + .driver = {
> + .name = "amd_isp_i2c_designware",
> + .pm = pm_ptr(&amd_isp_dw_i2c_dev_pm_ops),
> + },
> +};
> +
> +static int __init amd_isp_dw_i2c_init_driver(void)
> +{
> + return platform_driver_register(&amd_isp_dw_i2c_driver);
> +}
> +subsys_initcall(amd_isp_dw_i2c_init_driver);
Why this cannot be standard module initcall? This is ISP, not a critical
boot component.
> +
> +static void __exit amd_isp_dw_i2c_exit_driver(void)
> +{
> + platform_driver_unregister(&amd_isp_dw_i2c_driver);
> +}
> +module_exit(amd_isp_dw_i2c_exit_driver);
> +
> +MODULE_AUTHOR("Venkata Narendra Kumar Gutta <vengutta@xxxxxxx>");
> +MODULE_AUTHOR("Pratap Nirujogi <pratap.nirujogi@xxxxxxx>");
> +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter in AMD ISP");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS("I2C_DW");
> +MODULE_IMPORT_NS("I2C_DW_COMMON");
> +MODULE_LICENSE("GPL and additional rights");
> diff --git a/drivers/i2c/busses/i2c-designware-amdisp.h b/drivers/i2c/busses/i2c-designware-amdisp.h
> new file mode 100644
> index 000000000000..f98661fdaedf
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-designware-amdisp.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright 2024-2025 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Don't add custom license boilerplate.
> + */
> +
> +int isp_power_set(int on);
Best regards,
Krzysztof
