The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@xxxxxxx>
---
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-designware-amdisp.c | 266 +++++++++++++++++++++
drivers/i2c/busses/i2c-designware-amdisp.h | 24 ++
4 files changed, 301 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-designware-amdisp.c
create mode 100644 drivers/i2c/busses/i2c-designware-amdisp.h
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fc438f445771..79448211baae 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -592,6 +592,16 @@ config I2C_DESIGNWARE_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
+config I2C_DESIGNWARE_AMDISP
+ tristate "Synopsys DesignWare Platform for AMDISP"
+ depends on I2C_DESIGNWARE_CORE
+ help
+ If you say yes to this option, support will be included for the
+ AMDISP Synopsys DesignWare I2C adapter.
+
+ This driver can also be built as a module. If so, the module
+ will be called amd_isp_i2c_designware.
+
config I2C_DESIGNWARE_AMDPSP
bool "AMD PSP I2C semaphore support"
depends on ACPI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1c2a4510abe4..cfe53038df69 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
i2c-designware-platform-y := i2c-designware-platdrv.o
i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP) += i2c-designware-amdpsp.o
i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
+obj-$(CONFIG_I2C_DESIGNWARE_AMDISP) += i2c-designware-amdisp.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-y := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_DIGICOLOR) += i2c-digicolor.o
diff --git a/drivers/i2c/busses/i2c-designware-amdisp.c b/drivers/i2c/busses/i2c-designware-amdisp.c
new file mode 100644
index 000000000000..dc90510a440b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-amdisp.c
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright 2024-2025 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/units.h>
+
+#include "i2c-designware-core.h"
+#include "i2c-designware-amdisp.h"
+
+#define AMD_ISP_I2C_INPUT_CLK 100 //100 Mhz
+
+#define to_amd_isp_i2c_dev(dev) \
+ ((struct amd_isp_i2c_dev *)container_of(dev, struct amd_isp_i2c_dev, dw_dev))
+
+struct amd_isp_i2c_dev {
+ struct dw_i2c_dev dw_dev;
+};
+
+static void amd_isp_dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
+{
+ pm_runtime_disable(dev->dev);
+
+ if (dev->shared_with_punit)
+ pm_runtime_put_noidle(dev->dev);
+}
+
+static u32 amd_isp_dw_i2c_get_clk_rate(struct dw_i2c_dev *dev)
+{
+ return AMD_ISP_I2C_INPUT_CLK * 1000;
+}
+
+static int amd_isp_dw_i2c_plat_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adap;
+ struct amd_isp_i2c_dev *isp_i2c_dev;
+ struct dw_i2c_dev *dev;
+ int ret;
+
+ isp_i2c_dev = devm_kzalloc(&pdev->dev, sizeof(struct amd_isp_i2c_dev),
+ GFP_KERNEL);
+ if (!isp_i2c_dev)
+ return -ENOMEM;
+
+ dev = &isp_i2c_dev->dw_dev;
+ dev->dev = &pdev->dev;
+
+ /**
+ * Use the polling mode to send/receive the data, because
+ * no IRQ connection from ISP I2C
+ */
+ dev->flags |= ACCESS_POLLING;
+ platform_set_drvdata(pdev, dev);
+
+ dev->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ ret = isp_power_set(true);
+ if (ret) {
+ dev_err(dev->dev, "unable to turn on the amdisp i2c power:%d\n", ret);
+ return ret;
+ }
+
+ dev->get_clk_rate_khz = amd_isp_dw_i2c_get_clk_rate;
+ ret = i2c_dw_fw_parse_and_configure(dev);
+ if (ret)
+ goto exit;
+
+ i2c_dw_configure(dev);
+
+ adap = &dev->adapter;
+ adap->owner = THIS_MODULE;
+ ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+ adap->dev.of_node = pdev->dev.of_node;
+ /* arbitrary large number to avoid any conflicts */
+ adap->nr = 99;
+
+ if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE);
+ } else {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE |
+ DPM_FLAG_SMART_SUSPEND);
+ }
+
+ device_enable_async_suspend(&pdev->dev);
+
+ /* The code below assumes runtime PM to be disabled. */
+ WARN_ON(pm_runtime_enabled(&pdev->dev));
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+
+ if (dev->shared_with_punit)
+ pm_runtime_get_noresume(&pdev->dev);
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = i2c_dw_probe(dev);
+ if (ret) {
+ dev_err(dev->dev, "i2c_dw_probe failed %d\n", ret);
+ goto exit_probe;
+ }
+
+ isp_power_set(false);
+ return ret;
+
+exit_probe:
+ amd_isp_dw_i2c_plat_pm_cleanup(dev);
+ isp_power_set(false);
+exit:
+ isp_power_set(false);
+ return ret;
+}
+
+static void amd_isp_dw_i2c_plat_remove(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ i2c_del_adapter(&dev->adapter);
+
+ i2c_dw_disable(dev);
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ amd_isp_dw_i2c_plat_pm_cleanup(dev);
+
+ reset_control_assert(dev->rst);
+}
+
+static int amd_isp_dw_i2c_plat_prepare(struct device *dev)
+{
+ /*
+ * If the ACPI companion device object is present for this device, it
+ * may be accessed during suspend and resume of other devices via I2C
+ * operation regions, so tell the PM core and middle layers to avoid
+ * skipping system suspend/resume callbacks for it in that case.
+ */
+ return !has_acpi_companion(dev);
+}
+
+static int amd_isp_dw_i2c_plat_runtime_suspend(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ if (i_dev->shared_with_punit)
+ return 0;
+
+ i2c_dw_disable(i_dev);
+ i2c_dw_prepare_clk(i_dev, false);
+
+ return 0;
+}
+
+static int amd_isp_dw_i2c_plat_suspend(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ i2c_mark_adapter_suspended(&i_dev->adapter);
+
+ return amd_isp_dw_i2c_plat_runtime_suspend(dev);
+}
+
+static int amd_isp_dw_i2c_plat_runtime_resume(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ if (!i_dev->shared_with_punit)
+ i2c_dw_prepare_clk(i_dev, true);
+
+ i_dev->init(i_dev);
+
+ return 0;
+}
+
+static int amd_isp_dw_i2c_plat_resume(struct device *dev)
+{
+ struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+ amd_isp_dw_i2c_plat_runtime_resume(dev);
+ i2c_mark_adapter_resumed(&i_dev->adapter);
+
+ return 0;
+}
+
+static const struct dev_pm_ops amd_isp_dw_i2c_dev_pm_ops = {
+ .prepare = pm_sleep_ptr(amd_isp_dw_i2c_plat_prepare),
+ LATE_SYSTEM_SLEEP_PM_OPS(amd_isp_dw_i2c_plat_suspend, amd_isp_dw_i2c_plat_resume)
+ RUNTIME_PM_OPS(amd_isp_dw_i2c_plat_runtime_suspend, amd_isp_dw_i2c_plat_runtime_resume, NULL)
+};
+
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:amd_isp_i2c_designware");
+
+static struct platform_driver amd_isp_dw_i2c_driver = {
+ .probe = amd_isp_dw_i2c_plat_probe,
+ .remove = amd_isp_dw_i2c_plat_remove,
+ .driver = {
+ .name = "amd_isp_i2c_designware",
+ .pm = pm_ptr(&amd_isp_dw_i2c_dev_pm_ops),
+ },
+};
+
+static int __init amd_isp_dw_i2c_init_driver(void)
+{
+ return platform_driver_register(&amd_isp_dw_i2c_driver);
+}
+subsys_initcall(amd_isp_dw_i2c_init_driver);
+
+static void __exit amd_isp_dw_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&amd_isp_dw_i2c_driver);
+}
+module_exit(amd_isp_dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Venkata Narendra Kumar Gutta <vengutta@xxxxxxx>");
+MODULE_AUTHOR("Pratap Nirujogi <pratap.nirujogi@xxxxxxx>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter in AMD ISP");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("I2C_DW");
+MODULE_IMPORT_NS("I2C_DW_COMMON");
+MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/i2c/busses/i2c-designware-amdisp.h b/drivers/i2c/busses/i2c-designware-amdisp.h
new file mode 100644
index 000000000000..f98661fdaedf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-amdisp.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright 2024-2025 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+int isp_power_set(int on);
--
2.43.0
