[PATCH -next v3 11/15] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the corsair-psu module needs to maintain hid resources
by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
resources are consistent with the device life cycle, and release
hid resources before device is released. At the same time, it can avoid
the goto-release encoding, drop the fail_and_close and fail_and_stop
lables, and directly return the error code when an error occurs.

Reviewed-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
---
v2 -> v3: None
v2: https://lore.kernel.org/all/20240909012313.500341-12-lizetao1@xxxxxxxxxx/
v1 -> v2: Adjust commit information
v1: https://lore.kernel.org/all/20240904123607.3407364-15-lizetao1@xxxxxxxxxx/

 drivers/hwmon/corsair-psu.c | 24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index f8f22b8a67cd..b574ec9cd00f 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -787,14 +787,10 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
 	if (ret)
 		return ret;
 
-	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
 	if (ret)
 		return ret;
 
-	ret = hid_hw_open(hdev);
-	if (ret)
-		goto fail_and_stop;
-
 	priv->hdev = hdev;
 	hid_set_drvdata(hdev, priv);
 	mutex_init(&priv->lock);
@@ -805,13 +801,13 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
 	ret = corsairpsu_init(priv);
 	if (ret < 0) {
 		dev_err(&hdev->dev, "unable to initialize device (%d)\n", ret);
-		goto fail_and_stop;
+		return ret;
 	}
 
 	ret = corsairpsu_fwinfo(priv);
 	if (ret < 0) {
 		dev_err(&hdev->dev, "unable to query firmware (%d)\n", ret);
-		goto fail_and_stop;
+		return ret;
 	}
 
 	corsairpsu_get_criticals(priv);
@@ -820,20 +816,12 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
 	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsairpsu", priv,
 							  &corsairpsu_chip_info, NULL);
 
-	if (IS_ERR(priv->hwmon_dev)) {
-		ret = PTR_ERR(priv->hwmon_dev);
-		goto fail_and_close;
-	}
+	if (IS_ERR(priv->hwmon_dev))
+		return PTR_ERR(priv->hwmon_dev);
 
 	corsairpsu_debugfs_init(priv);
 
 	return 0;
-
-fail_and_close:
-	hid_hw_close(hdev);
-fail_and_stop:
-	hid_hw_stop(hdev);
-	return ret;
 }
 
 static void corsairpsu_remove(struct hid_device *hdev)
@@ -842,8 +830,6 @@ static void corsairpsu_remove(struct hid_device *hdev)
 
 	debugfs_remove_recursive(priv->debugfs);
 	hwmon_device_unregister(priv->hwmon_dev);
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
 }
 
 static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
-- 
2.34.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux