[PATCH -next v3 14/15] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the nzxt-kraken3 module needs to maintain hid resources
by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
resources are consistent with the device life cycle, and release
hid resources before device is released. At the same time, it can avoid
the goto-release encoding, drop the fail_and_close and fail_and_stop
lables, and directly return the error code when an error occurs.

Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Reviewed-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
---
v2 -> v3: Change "nzxt-kraken2" to "nzxt-kraken3" in the commit message.
v2: https://lore.kernel.org/all/20240909012313.500341-15-lizetao1@xxxxxxxxxx/
v1 -> v2: Adjust commit information
v1: https://lore.kernel.org/all/20240904123607.3407364-19-lizetao1@xxxxxxxxxx/

 drivers/hwmon/nzxt-kraken3.c | 34 +++++++---------------------------
 1 file changed, 7 insertions(+), 27 deletions(-)

diff --git a/drivers/hwmon/nzxt-kraken3.c b/drivers/hwmon/nzxt-kraken3.c
index 00f3ac90a290..71b8c21cfe1b 100644
--- a/drivers/hwmon/nzxt-kraken3.c
+++ b/drivers/hwmon/nzxt-kraken3.c
@@ -897,17 +897,9 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
 	}
 
 	/* Enable hidraw so existing user-space tools can continue to work */
-	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
-	if (ret) {
-		hid_err(hdev, "hid hw start failed with %d\n", ret);
+	ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
+	if (ret)
 		return ret;
-	}
-
-	ret = hid_hw_open(hdev);
-	if (ret) {
-		hid_err(hdev, "hid hw open failed with %d\n", ret);
-		goto fail_and_stop;
-	}
 
 	switch (hdev->product) {
 	case USB_PRODUCT_ID_X53:
@@ -928,15 +920,12 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
 		device_name = "kraken2023elite";
 		break;
 	default:
-		ret = -ENODEV;
-		goto fail_and_close;
+		return -ENODEV;
 	}
 
 	priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
-	if (!priv->buffer) {
-		ret = -ENOMEM;
-		goto fail_and_close;
-	}
+	if (!priv->buffer)
+		return -ENOMEM;
 
 	mutex_init(&priv->buffer_lock);
 	mutex_init(&priv->z53_status_request_lock);
@@ -948,7 +937,7 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
 	ret = kraken3_init_device(hdev);
 	if (ret < 0) {
 		hid_err(hdev, "device init failed with %d\n", ret);
-		goto fail_and_close;
+		return ret;
 	}
 
 	ret = kraken3_get_fw_ver(hdev);
@@ -960,18 +949,12 @@ static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id
 	if (IS_ERR(priv->hwmon_dev)) {
 		ret = PTR_ERR(priv->hwmon_dev);
 		hid_err(hdev, "hwmon registration failed with %d\n", ret);
-		goto fail_and_close;
+		return ret;
 	}
 
 	kraken3_debugfs_init(priv, device_name);
 
 	return 0;
-
-fail_and_close:
-	hid_hw_close(hdev);
-fail_and_stop:
-	hid_hw_stop(hdev);
-	return ret;
 }
 
 static void kraken3_remove(struct hid_device *hdev)
@@ -980,9 +963,6 @@ static void kraken3_remove(struct hid_device *hdev)
 
 	debugfs_remove_recursive(priv->debugfs);
 	hwmon_device_unregister(priv->hwmon_dev);
-
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
 }
 
 static const struct hid_device_id kraken3_table[] = {
-- 
2.34.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux