The dependency handling of the Synopsys DesignWare I2C adapter drivers is going to be changed so that the glue drivers for the platform and PCI buses depend on I2C_DESIGNWARE_CORE. Right now this driver prevents that update because it selects I2C_DESIGNWARE_PLATFORM. To make the dependency on I2C_DESIGNWARE_PLATFORM consistent with the other drivers in kernel that depend on it, and allow the dependency handling of the Synopsys DesignWare I2C drivers to be updated, change the "select" into "depends on". Cc: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx> Cc: Mengyuan Lou <mengyuanlou@xxxxxxxxxxxxx> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx> Cc: Eric Dumazet <edumazet@xxxxxxxxxx> Cc: Jakub Kicinski <kuba@xxxxxxxxxx> Cc: Paolo Abeni <pabeni@xxxxxxxxxx> Cc: netdev@xxxxxxxxxxxxxxx Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> --- drivers/net/ethernet/wangxun/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig index 85cdbdd44fec..e46ccebcfd22 100644 --- a/drivers/net/ethernet/wangxun/Kconfig +++ b/drivers/net/ethernet/wangxun/Kconfig @@ -41,10 +41,9 @@ config TXGBE tristate "Wangxun(R) 10GbE PCI Express adapters support" depends on PCI depends on COMMON_CLK + depends on I2C_DESIGNWARE_PLATFORM select MARVELL_10G_PHY select REGMAP - select I2C - select I2C_DESIGNWARE_PLATFORM select PHYLINK select HWMON if TXGBE=y select SFP -- 2.45.2
