Hi Claudiu,
On Fri, Jun 21, 2024 at 1:23 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Document the Renesas RZ/G3S (R9A08G045) RIIC IP. This is compatible with
> the version available on Renesas RZ/V2H (R9A09G075). Most of the IP
> variants that the RIIC driver is working with supports fast mode plus.
> However, it happens that on the same SoC to have IP instatiations that
> support fast mode plus as well as IP instantiation that doesn't support
> it. For this, introduced the renesas,riic-no-fast-mode-plus property.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
> +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
> @@ -25,6 +25,10 @@ properties:
> - renesas,riic-r9a07g054 # RZ/V2L
> - const: renesas,riic-rz # RZ/A or RZ/G2L
>
> + - items:
> + - const: renesas,riic-r9a08g045 # RZ/G3S
> + - const: renesas,riic-r9a09g057
> +
LGTM.
> - const: renesas,riic-r9a09g057 # RZ/V2H(P)
>
> reg:
> @@ -66,6 +70,10 @@ properties:
> resets:
> maxItems: 1
>
> + renesas,riic-no-fast-mode-plus:
> + description: specifies if fast mode plus is not supported
> + type: boolean
> +
Do you really need this?
The bus' clock-frequency property should take into account the combined
capabilities of all of controller, target, and wiring. It is up to the
DTS writer to validate that all timing conditions are met.
> required:
> - compatible
> - reg
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
