Re: [PATCH 4/5] docs: i2c: summary: document use of inclusive language

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/7/2024 4:17 AM, Wolfram Sang wrote:
> We now have the updated I2C specs and our own Code of Conduct, so we
> have all we need to switch over to the inclusive terminology. Define
> them here.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/i2c/i2c_bus.svg | 15 ++++++++-------
>  Documentation/i2c/summary.rst | 23 +++++++++++++++++------
>  2 files changed, 25 insertions(+), 13 deletions(-)
> 

<snip>

> diff --git a/Documentation/i2c/summary.rst b/Documentation/i2c/summary.rst
> index a1e5c0715f8b..b10b6aaafcec 100644
> --- a/Documentation/i2c/summary.rst
> +++ b/Documentation/i2c/summary.rst
> @@ -31,15 +31,16 @@ implement all the common SMBus protocol semantics or messages.
>  Terminology
>  ===========
>  
> -Using the terminology from the official documentation, the I2C bus connects
> -one or more *master* chips and one or more *slave* chips.
> +The I2C bus connects one or more *controller* chips and one or more *target*
> +chips.
> +
>  
>  .. kernel-figure::  i2c_bus.svg
> -   :alt:    Simple I2C bus with one master and 3 slaves
> +   :alt:    Simple I2C bus with one controller and 3 targets
>  
>     Simple I2C bus
>  
> -A **master** chip is a node that starts communications with slaves. In the
> +A **controller** chip is a node that starts communications with targets. In the
>  Linux kernel implementation it is called an **adapter** or bus. Adapter
>  drivers are in the ``drivers/i2c/busses/`` subdirectory.
>  
> @@ -48,8 +49,8 @@ whole class of I2C adapters. Each specific adapter driver either depends on
>  an algorithm driver in the ``drivers/i2c/algos/`` subdirectory, or includes
>  its own implementation.
>  
> -A **slave** chip is a node that responds to communications when addressed
> -by the master. In Linux it is called a **client**. Client drivers are kept
> +A **target** chip is a node that responds to communications when addressed
> +by the controller. In Linux it is called a **client**. Client drivers are kept

Are we continuing to use client instead of local target and remote target?

Thanks,
Easwar




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux