Hi Alain On 12/15/23 18:06, Alain Volmat wrote:
This series first perform enhancements in the way interrupt are handled and cleanup in messages. Then it adds support for the stm32mp25 which differs in that it only has a single irq line for both event/error and has a different handling of the FastModePlus. Support is then enabled within the stm32mp25 related device-trees. Changelog: v3: - addition of 2 commits dealing with readl_relaxed(I2C_ISR) in isr handler and a second one to use dev_err_probe during probe - correction of SOB in commit v2: - correct st,stm32-i2c.yaml. Use if then else scheme to indicate number of interrupts / interrupt-names depending on the compatible while keeping the description within the common part - correct 2 maybe-uninitialized warnings * ret in stm32f7_i2c_write_fm_plus_bits * irq_error in stm32f7_i2c_probe, move the platform_get_irq within the same if block as devm_request_threaded_irq Alain Volmat (9): i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: simplify status messages in case of errors dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: perform I2C_ISR read once at beginning of event isr i2c: stm32f7: add support for stm32mp25 soc arm64: dts: st: add all 8 i2c nodes on stm32mp251 arm64: dts: st: add i2c2/i2c8 pins for stm32mp25 arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1 .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 28 ++ arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 36 ++ arch/arm64/boot/dts/st/stm32mp251.dtsi | 96 +++++ arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 20 + drivers/i2c/busses/i2c-stm32f7.c | 342 +++++++++--------- 5 files changed, 358 insertions(+), 164 deletions(-)
DT patches applied on stm32-next. Not that I added acces-controller bindings for all I2C nodes.
Thanks! Alex