If this is an adapter on a muxed bus segment, assume that each segment
is connected to a subset of the (> 8) overall memory slots. In this
case let's probe the maximum of 8 slots, however stop if the number
of overall populated slots is reached.
If we're not on a muxed segment and the total number of slots is > 8,
report an error, because then not all SPD eeproms can be addressed.
Presumably the bus is muxed, but the mux config is missing.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
drivers/i2c/i2c-smbus.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 74807c6db..ad7ea0215 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -351,13 +351,17 @@ void i2c_register_spd(struct i2c_adapter *adap)
if (!dimm_count)
return;
- dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
- dimm_count, slot_count);
-
- if (slot_count > 8) {
- dev_warn(&adap->dev,
- "Systems with more than 8 memory slots not supported yet, not instantiating SPD\n");
- return;
+ /* Check whether we're a child adapter on a muxed segment */
+ if (i2c_parent_is_i2c_adapter(adap)) {
+ slot_count = 8;
+ } else {
+ if (slot_count > 8) {
+ dev_err(&adap->dev,
+ "More than 8 memory slots on a single bus, mux config missing?\n");
+ return;
+ }
+ dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
+ dimm_count, slot_count);
}
/*
--
2.43.2
