Hi Heiner,
On Sat, Mar 04, 2023 at 10:33:05PM +0100, Heiner Kallweit wrote:
> I2C core ensures in i2c_smbus_xfer() that the I2C bus lock is held when
> calling the smbus_xfer callback. That's i801_access() in our case.
> I think it's safe in general to assume that the I2C bus lock is held
> when the smbus_xfer callback is called.
> Therefore I see no need to define an own mutex.
I think it makes sense... unless I missed something I don't see
anything else being racy in i801_access().
Have you checked i801_acpi_io_handler()?
Andi
> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-i801.c | 14 ++++----------
> 1 file changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index d6a0c3b53..7641bd0ac 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -289,10 +289,9 @@ struct i801_priv {
>
> /*
> * If set to true the host controller registers are reserved for
> - * ACPI AML use. Protected by acpi_lock.
> + * ACPI AML use.
> */
> bool acpi_reserved;
> - struct mutex acpi_lock;
> };
>
> #define FEATURE_SMBUS_PEC BIT(0)
> @@ -871,11 +870,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
> int hwpec, ret;
> struct i801_priv *priv = i2c_get_adapdata(adap);
>
> - mutex_lock(&priv->acpi_lock);
> - if (priv->acpi_reserved) {
> - mutex_unlock(&priv->acpi_lock);
> + if (priv->acpi_reserved)
> return -EBUSY;
> - }
>
> pm_runtime_get_sync(&priv->pci_dev->dev);
>
> @@ -916,7 +912,6 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
>
> pm_runtime_mark_last_busy(&priv->pci_dev->dev);
> pm_runtime_put_autosuspend(&priv->pci_dev->dev);
> - mutex_unlock(&priv->acpi_lock);
> return ret;
> }
>
> @@ -1566,7 +1561,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
> * further access from the driver itself. This device is now owned
> * by the system firmware.
> */
> - mutex_lock(&priv->acpi_lock);
> + i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
>
> if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
> priv->acpi_reserved = true;
> @@ -1586,7 +1581,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
> else
> status = acpi_os_write_port(address, (u32)*value, bits);
>
> - mutex_unlock(&priv->acpi_lock);
> + i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
>
> return status;
> }
> @@ -1640,7 +1635,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> priv->adapter.dev.parent = &dev->dev;
> ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
> priv->adapter.retries = 3;
> - mutex_init(&priv->acpi_lock);
>
> priv->pci_dev = dev;
> priv->features = id->driver_data;
> --
> 2.39.2
>
>
