On Mon, Jun 12, 2023 at 09:53:02AM +0000, Biju Das wrote:
> Hi All,
>
> How do we proceed here between [1] and [2]?
>
> DT-Maintainers suggestion:
> [1]
> raa215300: pmic@12 {
> compatible = "renesas,raa215300";
> reg = <0x12>, <0x6f>;
> reg-names = "main", "rtc";
>
> clocks = <&x2>;
> clock-names = "xin";
> /* Add Optional shared IRQ resource and share it to child and handle it both in parent and child */
> };
>
> Laurent/Wolfram suggestion to split it into two nodes and get rid of this patch:
> [2]
> raa215300: pmic @12 {
> compatible = "renesas,raa215300";
> reg = <0x12>;
>
> /* Add Optional shared IRQ */
> renesas,raa215300-rtc = <&rtc_raa215300>; /* Parse the handle and Enable RTC , if present.*/
> };
>
> rtc_raa215300: rtc@6f {
> compatible = "renesas,raa215300-isl1208";
Make this
compatible = "renesas,raa215300-isl1208", "isil,isl1208";
Btw, it would be nice to convert
Documentation/devicetree/bindings/rtc/isil,isl1208.txt to YAML.
> reg = <0x6f>;
>
> /* Add Optional shared IRQ */
> clocks = <&x2>;
> clock-names = "xin";
> renesas,raa215300-pmic = <&pmic>; /* Parse the handle to get PMIC version to check Oscillator bit is inverted or not */
This isn't nice. I would instead add a renesas,invert-xtoscb boolean
property. If you don't want different DT sources for different revisions
of the PMIC, one option is to perform the auto-detection in the boot
loader and update the DT dynamically there.
> };
> > -----Original Message-----
> > From: Biju Das
> > Sent: Thursday, June 8, 2023 1:57 PM
> > To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Cc: Wolfram Sang <wsa@xxxxxxxxxx>; Geert Uytterhoeven <geert@linux-
> > m68k.org>; Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Rob
> > Herring <robh+dt@xxxxxxxxxx>; Andrzej Hajda <andrzej.hajda@xxxxxxxxx>;
> > Neil Armstrong <neil.armstrong@xxxxxxxxxx>; Robert Foss
> > <rfoss@xxxxxxxxxx>; David Airlie <airlied@xxxxxxxxx>; Daniel Vetter
> > <daniel@xxxxxxxx>; Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>;
> > Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>; Hans Verkuil <hverkuil-
> > cisco@xxxxxxxxx>; Alessandro Zummo <a.zummo@xxxxxxxxxxxx>; Alexandre
> > Belloni <alexandre.belloni@xxxxxxxxxxx>; Jonas Karlman <jonas@xxxxxxxxx>;
> > Jernej Skrabec <jernej.skrabec@xxxxxxxxx>; Uwe Kleine-König <u.kleine-
> > koenig@xxxxxxxxxxxxxx>; Corey Minyard <cminyard@xxxxxxxxxx>; Marek Behún
> > <kabel@xxxxxxxxxx>; Jiasheng Jiang <jiasheng@xxxxxxxxxxx>; Antonio Borneo
> > <antonio.borneo@xxxxxxxxxxx>; Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>;
> > Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
> > linux-i2c@xxxxxxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx; Geert
> > Uytterhoeven <geert+renesas@xxxxxxxxx>; Fabrizio Castro
> > <fabrizio.castro.jz@xxxxxxxxxxx>; linux-renesas-soc@xxxxxxxxxxxxxxx; Mark
> > Brown <broonie@xxxxxxxxxx>
> > Subject: RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
> >
> > Hi Laurent,
> >
> > Thanks for the feedback.
> >
> > > Subject: Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device
> > > API
> > >
> > > Hi Biju,
> > >
> > > On Thu, Jun 08, 2023 at 11:00:19AM +0000, Biju Das wrote:
> > > > > Subject: Re: [PATCH v5 01/11] i2c: Enhance
> > > > > i2c_new_ancillary_device API On Thu, Jun 08, 2023 at 06:41:35AM+0000, Biju Das wrote:
> > > > > > > Subject: RE: [PATCH v5 01/11] i2c: Enhance
> > > > > > > i2c_new_ancillary_device API
> > > > > > > > Subject: Re: [PATCH v5 01/11] i2c: Enhance
> > > > > > > > i2c_new_ancillary_device API
> > > > > > > >
> > > > > > > > Hi all,
> > > > > > > >
> > > > > > > > sorry for not being able to chime in earlier.
> > > > > > > >
> > > > > > > > > In Biju's particular use case, the i2c device responds to
> > > > > > > > > two addresses, which is the standard i2c ancillary use case.
> > > > > > > > > However, what's special
> > > > > > > >
> > > > > > > > Not quite. ancillary is used when a *driver* needs to take
> > > > > > > > care of two addresses. We already have devices bundling two
> > > > > > > > features into the same chip. I recall at least RTC + EEPROM
> > > > > > > > somewhere. And so far, we have been handling this by
> > > > > > > > creating two nodes in DT and have proper binding docs.
> > > > > > > > I think this is cleaner. First, you can see in DT already
> > > > > > > > what the compound device really consists of. In this case,
> > > > > > > > which RTC and RTC driver is exactly needed. Second, the code
> > > > > > > > added here adds complexity to the I2C core with another
> > > > > > > > layer of inderection for dummy devices.
> > > > > > >
> > > > > > > FYI, please see [1] and [2]
> > > > > > >
> > > > > > > As per DT maintainers, most of PMICs are described with one
> > > > > > > node, even though RTC is on separate address. According to
> > > > > > > them the DT schema allows multiple addresses for children.
> > > > > > > But currently we lacks implementation for that. The
> > > > > > > enhancement to this API allows that.
> > > > > > >
> > > > > > > > > As some resources are shared (knowledge about the clocks),
> > > > > > > > > splitting this in two distinct devices in DT (which is
> > > > > > > > > what Biju's initial patch series did) would need phandles
> > > > > > > > > to link both nodes together.
> > > > > > > > >
> > > > > > > > > Do you have a better idea how to represent this?
> > > > > > > >
> > > > > > > > Not sure if I understood this chip correctly, but maybe: The
> > > > > > > > PMIC driver exposes a clock gate which can be consumed by
> > > > > > > > the RTC driver?
> > > > > >
> > > > > > Let me give me some details of this PMIC chip.
> > > > > >
> > > > > > PMIC device has 2 addresses "0x12:- PMIC" , "0x6f"- rtc.
> > > > > >
> > > > > > It has XIN, XOUT, INT# pins and a register for firmware revisions.
> > > > >
> > > > > Is the firmware revision register accessed through address 0x12
> > > > > (PMIC) or 0x6f (RTC) ?
> > > >
> > > > 0x12(PMIC).
> > > >
> > > > > > Based on the system design,
> > > > > >
> > > > > > If XIN and XOUT is connected to external crystal, Internal
> > > > > > oscillator is enabled for RTC. In this case we need to set the
> > > > > > oscillator bit to "0".
> > > > > >
> > > > > > If XIN is connected to external clock source, Internal
> > > > > > oscillator is disabled for RTC. In this case we need to set the
> > > > > > oscillator bit to "1".
> > > > >
> > > > > Same here, which address is the oscillator bit accessed through ?
> > > >
> > > > RTC (0x6F)--> to set oscillator bit.
> > >
> > > And does the PMIC part depend on the oscillator bit being set
> > > correctly, or is that used for the RTC only ?
> >
> > PMIC part does not. It is used only in RTC.
> >
> > Based on PMIC revision, we need to set the oscillator bit in RTC block
> > for PMIC rev a0 and rest of the PMIC chips.
> >
> > On PMIC rev0, oscillator bit is inverted.
> >
> > > > > > If XIN and XOUT not connected RTC operation not possible.
> > > > > >
> > > > > > IRQ# (optional) functionality is shared between PMIC and RTC.
> > > > > > (PMIC fault for various bucks/LDOs/WDT/OTP/NVM and alarm condition).
> > > > >
> > > > > IRQs can be shared between multiple devices so this shouldn't be a
> > > > > problem.
> > > >
> > > > OK. How do we represent this IRQ in DT?
> > >
> > > You can simply reference the same IRQ from the interrupts property of
> > > different DT nodes.
> > >
> > > > > > The board, I have doesn't populate IRQ# pin. If needed some
> > > > > > customers can populate IRQ# pin and use it for PMIC fault and
> > > > > > RTC alarm.
> > > > > >
> > > > > > Also, currently my board has PMIC rev a0 where oscillator bit is
> > > > > > inverted and internal oscillator is enabled (ie: XIN and XOUT is
> > > > > > connected to external crystal)
--
Regards,
Laurent Pinchart
