Re: [PATCH v6 5/6] i2c: Add support for Intel LJCA USB I2C driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andi,

Thanks for the review.
On Sun, Mar 26, 2023 at 05:38:46PM +0200, Andi Shyti wrote:
> Hi Ye,
> 
> looks good, just a few questions:
> 
> On Fri, Mar 24, 2023 at 01:21:12AM +0800, Ye Xiang wrote:
> > This patch implements the I2C function of Intel USB-I2C/GPIO/SPI adapter
> 
> also here, please keep using the imperative form.
Got it.
> 
> > device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
> > I2c module with specific protocol through interfaces exported by LJCA USB
> > driver.
...
> > +static u8 ljca_i2c_format_slave_addr(u8 slave_addr, u8 type)
> > +{
> > +	return (slave_addr << 1) | (type == LJCA_I2C_READ_XFER_TYPE) ?
> > +		       LJCA_I2C_SLAVE_TRANSFER_READ :
> > +		       LJCA_I2C_SLAVE_TRANSFER_WRITE;
> > +}
> 
> How about:
> 
> 	return (slave_addr << 1) | !!type;
> 
> BTW, am I reading correctly that the address here is composed as:
> 
>    7     6     5     5     3     2     1    0
>  ADDR7 ADDR6 ADDR5 ADDR4 ADDR3 ADDR2 ADDR1 R/W
> 
> [...]
>
You are correct. Will adopt this solution on next version. 
> > +static u32 ljca_i2c_func(struct i2c_adapter *adap)
> > +{
> > +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> 
> how is the smbus supported here?
The i2c-sub module of LJCA device is SMBUS compatible.
It's supported by LJCA device hardware itself.

Thanks
Ye Xiang





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux