On my x05 laptop I got: Memory type 0x12 not supported yet, not instantiating SPD Adding the 0x12 case lead to a successful instantiated SPD AT24 EEPROM. i801_smbus 0000:00:1f.3: SMBus using polling i2c i2c-6: 2/2 memory slots populated (from DMI) at24 6-0050: 256 byte spd EEPROM, read-only i2c i2c-6: Successfully instantiated SPD at 0x50 at24 6-0051: 256 byte spd EEPROM, read-only And then, I decoded it successfully via decode-dimms. Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> --- Changes since v1: - Added memory type document link - Added case for LPDDR drivers/i2c/i2c-smbus.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index 07c92c8495a3..c85710ed9548 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -361,9 +361,15 @@ void i2c_register_spd(struct i2c_adapter *adap) return; } + /* + * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78 + * https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf + */ switch (common_mem_type) { + case 0x12: /* DDR */ case 0x13: /* DDR2 */ case 0x18: /* DDR3 */ + case 0x1B: /* LPDDR */ case 0x1C: /* LPDDR2 */ case 0x1D: /* LPDDR3 */ name = "spd"; -- 2.37.4
