Re: [PATCH v4 3/8] dt-bindings: media: add bindings for TI DS90UB960

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 01, 2022 at 03:20:27PM +0200, Tomi Valkeinen wrote:
> Add DT bindings for TI DS90UB960 FPDLink-3 Deserializer.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/media/i2c/ti,ds90ub960.yaml      | 392 ++++++++++++++++++
>  1 file changed, 392 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
> new file mode 100644
> index 000000000000..4456d9b3e2c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
> @@ -0,0 +1,392 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
> +
> +maintainers:
> +  - Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> +
> +description: |

Don't need '|'

> +  The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
> +  forwarding.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,ds90ub960-q1
> +      - ti,ds90ub9702-q1
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      i2c addresses for the deserializer and the serializers
> +
> +  reg-names:
> +    items:
> +      - const: main

'reg-names' is not all that useful with only 1 entry.

> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      Reference clock connected to the REFCLK pin.
> +
> +  clock-names:
> +    items:
> +      - const: refclk
> +
> +  powerdown-gpios:
> +    maxItems: 1
> +    description:
> +      Specifier for the GPIO connected to the PDB pin.
> +
> +  i2c-alias-pool:

Something common or could be? If not, then needs a vendor prefix.

> +    $ref: /schemas/types.yaml#/definitions/uint16-array
> +    description:
> +      i2c alias pool for remote devices.

Needs a better description. What's an 'alias pool'?

0-0xffff are valid values?

> +
> +  links:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +      manual-strobe:
> +        type: boolean
> +        description:
> +          Enable manual strobe position and EQ level
> +
> +    patternProperties:
> +      '^link@[0-9a-f]+$':
> +        type: object
> +        additionalProperties: false
> +        properties:
> +          reg:
> +            description: The link number
> +            maxItems: 1
> +
> +          i2c-alias:

Vendor prefix.

> +            description: |
> +              The i2c address used for the serializer. Transactions to this
> +              address on the i2c bus where the deserializer resides are
> +              forwarded to the serializer.
> +
> +          rx-mode:

Vendor prefix. And so on...

> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum:
> +              - 0 # RAW10
> +              - 1 # RAW12 HF
> +              - 2 # RAW12 LF
> +              - 3 # CSI2 SYNC
> +              - 4 # CSI2 NON-SYNC
> +            description: FPD-Link Input Mode
> +
> +          cdr-mode:
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum:
> +              - 0 # FPD3
> +              - 1 # FPD4
> +            description: FPD-Link CDR Mode
> +
> +          strobe-pos:
> +            $ref: /schemas/types.yaml#/definitions/int32
> +            minimum: -13
> +            maximum: 13
> +            description: Manual strobe position, from -13 to 13

No need to put constraints in free form text.

> +
> +          eq-level:
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            maximum: 14
> +            description: Manual EQ level, from 0 to 14
> +
> +          serializer:
> +            type: object
> +            description: FPD-Link Serializer node
> +
> +        required:
> +          - reg
> +          - i2c-alias
> +          - rx-mode
> +          - serializer
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base

           additionalProperties: false

> +        description: FPD-Link input 0
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#

               unevaluatedProperties: false

Same for the other port nodes

> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: FPD-Link input 1
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: FPD-Link input 2
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: FPD-Link input 3
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +      port@4:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: CSI-2 Output 0
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4

Why the constraints on this endpoint? Are the other ones actually using 
properties from video-interfaces.yaml? If not, then just reference 
/properties/port and drop 'endpoint' instead.

> +
> +      port@5:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: CSI-2 Output 1
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +      clock-frequency = <400000>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      deser@3d {
> +        compatible = "ti,ds90ub960-q1";
> +
> +        reg-names = "main";
> +        reg       = <0x3d>;
> +
> +        clock-names = "refclk";
> +        clocks = <&fixed_clock>;
> +
> +        powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
> +
> +        i2c-alias-pool = /bits/ 16 <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          /* Port 0, Camera 0 */
> +          port@0 {
> +            reg = <0>;
> +
> +            ub960_fpd3_1_in: endpoint {
> +              remote-endpoint = <&ub953_1_out>;
> +
> +              rx-mode = <0>;

Looks like this is not defined under 'endpoint'.

> +            };
> +          };
> +
> +          /* Port 0, Camera 1 */
> +          port@1 {
> +            reg = <1>;
> +
> +            ub960_fpd3_2_in: endpoint {
> +              remote-endpoint = <&ub913_2_out>;
> +
> +              rx-mode = <0>;
> +            };
> +          };
> +
> +          /* Port 4, CSI-2 TX */
> +          port@4 {
> +            reg = <4>;
> +            ds90ub960_0_csi_out: endpoint {
> +              clock-lanes = <0>;
> +              data-lanes = <1 2 3 4>;
> +              link-frequencies = /bits/ 64 <800000000>;
> +              remote-endpoint = <&csi2_phy0>;
> +            };
> +          };
> +        };
> +
> +        links {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          /* Link 0 has DS90UB953 serializer and IMX390 sensor */
> +
> +          link@0 {
> +            reg = <0>;
> +            i2c-alias = <68>;
> +
> +            rx-mode = <3>;
> +
> +            serializer1: serializer {
> +              compatible = "ti,ds90ub953-q1";
> +
> +              gpio-controller;
> +              #gpio-cells = <2>;
> +
> +              #clock-cells = <0>;
> +
> +              ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                  reg = <0>;
> +                  ub953_1_in: endpoint {
> +                    clock-lanes = <0>;
> +                    data-lanes = <1 2 3 4>;
> +                    remote-endpoint = <&sensor_1_out>;
> +                  };
> +                };
> +
> +                port@1 {
> +                  reg = <1>;
> +
> +                  ub953_1_out: endpoint {
> +                    remote-endpoint = <&ub960_fpd3_1_in>;
> +                  };
> +                };
> +              };
> +
> +              i2c {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                sensor@21 {
> +                  compatible = "sony,imx390";
> +                  reg = <0x21>;
> +
> +                  clocks = <&clk_cam_27M>;
> +                  clock-names = "inck";
> +
> +                  xclr-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
> +                  error0-gpios = <&serializer1 1 GPIO_ACTIVE_HIGH>;
> +                  error1-gpios = <&serializer1 2 GPIO_ACTIVE_HIGH>;
> +                  comready-gpios = <&serializer1 3 GPIO_ACTIVE_HIGH>;
> +
> +                  port {
> +                    sensor_1_out: endpoint {
> +                      remote-endpoint = <&ub953_1_in>;
> +                    };
> +                  };
> +                };
> +              };
> +            };
> +          };  /* End of link@0 */
> +
> +          /* Link 1 has DS90UB913 serializer and OV10635 sensor */
> +
> +          link@1 {
> +            reg = <1>;
> +            i2c-alias = <69>;
> +
> +            rx-mode = <0>;
> +
> +            serializer2: serializer {
> +              compatible = "ti,ds90ub913a-q1";
> +
> +              gpio-controller;
> +              #gpio-cells = <2>;
> +
> +              clocks = <&clk_cam_48M>;
> +              clock-names = "clkin";
> +
> +              #clock-cells = <0>;
> +
> +              ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                  reg = <0>;
> +                  ub913_2_in: endpoint {
> +                    remote-endpoint = <&sensor_2_out>;
> +                  };
> +                };
> +
> +                port@1 {
> +                  reg = <1>;
> +
> +                  ub913_2_out: endpoint {
> +                    remote-endpoint = <&ub960_fpd3_2_in>;
> +                  };
> +                };
> +              };
> +
> +              i2c {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                sensor@30 {
> +                  compatible = "ovti,ov10635";
> +                  reg = <0x30>;
> +
> +                  clocks = <&serializer2>;
> +                  clock-names = "xvclk";
> +
> +                  powerdown-gpios = <&serializer2 0 GPIO_ACTIVE_HIGH>;
> +
> +                  port {
> +                    sensor_2_out: endpoint {
> +                      remote-endpoint = <&ub913_2_in>;
> +                      hsync-active = <1>;
> +                      vsync-active = <1>;
> +                      pclk-sample = <0>;
> +                      bus-width = <10>;
> +                    };
> +                  };
> +                };
> +              };
> +            };
> +          }; /* End of link@1 */
> +        };
> +      };
> +    };
> +...
> -- 
> 2.34.1
> 
> 



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux