Re: [RFC 09/10] i2c: mux: add support for fwnode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le Mon, 21 Feb 2022 19:55:25 +0200,
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> a écrit :

> On Mon, Feb 21, 2022 at 05:26:51PM +0100, Clément Léger wrote:
> > Modify i2c_mux_add_adapter() to use with fwnode API to allow creating
> > mux adapters with fwnode based devices. This allows to have a node
> > independent support for i2c muxes.  
> 
> I^2C muxes have their own description for DT and ACPI platforms, I'm not sure
> swnode should be used here at all. Just upload a corresponding SSDT overlay or
> DT overlay depending on the platform. Can it be achieved?
> 

Problem is that this PCIe card can be plugged either in a X86 platform
using ACPI or on a ARM one with device-tree. So it means I should have
two "identical" descriptions for each platforms.

-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux