Convert i2c-omap.txt to YAML schema for better checks and documentation. Following properties were used in DT but were not documented in txt bindings and has been included in YAML schema: 1. Include ti,am4372-i2c compatible 2. Document clocks property Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> --- Note that am335x-myirtech*.dtsi needs fixing to drop scl/sda-gpios which are not supported by i2c-omap driver. omap2/3 dmas property is being dropped by: https://lore.kernel.org/20210526094424.27234-1-vigneshr@xxxxxx v3: Add conditions around ti,hwmods usage drop dmas property as it was never used/supported set additionalProperties: False Address Rob H comments v2: Fix issues with make dt_bindings_check Add description on usage of ti,hwmods v2: https://lore.kernel.org/r/20210506140026.31254-1-vigneshr@xxxxxx v1: https://lore.kernel.org/r/20210505065511.918-1-vigneshr@xxxxxx .../devicetree/bindings/i2c/i2c-omap.txt | 37 ------- .../devicetree/bindings/i2c/ti,omap4-i2c.yaml | 102 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 103 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-omap.txt create mode 100644 Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt deleted file mode 100644 index a425b91af48f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ /dev/null @@ -1,37 +0,0 @@ -I2C for OMAP platforms - -Required properties : -- compatible : Must be - "ti,omap2420-i2c" for OMAP2420 SoCs - "ti,omap2430-i2c" for OMAP2430 SoCs - "ti,omap3-i2c" for OMAP3 SoCs - "ti,omap4-i2c" for OMAP4+ SoCs - "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs - "ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs - "ti,am64-i2c", "ti,omap4-i2c" for AM64 SoCs -- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) -- #address-cells = <1>; -- #size-cells = <0>; - -Recommended properties : -- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise - the default 100 kHz frequency will be used. - -Optional properties: -- Child nodes conforming to i2c bus binding - -Note: Current implementation will fetch base address, irq and dma -from omap hwmod data base during device registration. -Future plan is to migrate hwmod data base contents into device tree -blob so that, all the required data will be used from device tree dts -file. - -Examples : - -i2c1: i2c@0 { - compatible = "ti,omap3-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - clock-frequency = <400000>; -}; diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml new file mode 100644 index 000000000000..ff165ad1bee8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for I2C controllers on TI's OMAP and K3 SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@xxxxxx> + +properties: + compatible: + oneOf: + - enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c + - items: + - enum: + - ti,am4372-i2c + - ti,am64-i2c + - ti,am654-i2c + - ti,j721e-i2c + - const: ti,omap4-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + clock-frequency: true + + power-domains: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + ti,hwmods: + description: + Must be "i2c<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +# subnode's properties +patternProperties: + "@[0-9a-f]+$": + type: object + description: + Flash device uses the below defined properties in the subnode. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2420-i2c + - const: ti,omap2430-i2c + - const: ti,omap3-i2c + - const: ti,omap4-i2c + +then: + properties: + ti,hwmods: + items: + - pattern: "^i2c([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x2000000 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 710203d794d7..33625bb83b21 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13424,7 +13424,7 @@ M: Vignesh R <vigneshr@xxxxxx> L: linux-omap@xxxxxxxxxxxxxxx L: linux-i2c@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/i2c/i2c-omap.txt +F: Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml F: drivers/i2c/busses/i2c-omap.c OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS) -- 2.31.1
