> -----Original Message----- > From: Andy Shevchenko [mailto:andriy.shevchenko@xxxxxxxxxxxxxxx] > Sent: Thursday, April 1, 2021 12:05 AM > To: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>; Serge Semin > <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>; linux-i2c@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx > Cc: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>; Mika Westerberg > <mika.westerberg@xxxxxxxxxxxxxxx>; wsa@xxxxxxxxxx; yangyicong > <yangyicong@xxxxxxxxxx>; Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx> > Subject: [PATCH v1 1/1] i2c: designware: Adjust bus_freq_hz when refuse high > speed mode set > > When hardware doesn't support High Speed Mode, we forget bus_freq_hz > timing adjustment. This makes the timings and real registers being > unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. > > Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode") > Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@xxxxxxxxxxxxx> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > --- Thanks for fixing that. Reviewed-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx> > drivers/i2c/busses/i2c-designware-master.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/i2c/busses/i2c-designware-master.c > b/drivers/i2c/busses/i2c-designware-master.c > index 34bb4e21bcc3..9bfa06e31eec 100644 > --- a/drivers/i2c/busses/i2c-designware-master.c > +++ b/drivers/i2c/busses/i2c-designware-master.c > @@ -129,6 +129,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev > *dev) > if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) > != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) { > dev_err(dev->dev, "High Speed not supported!\n"); > + t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; > dev->master_cfg &= ~DW_IC_CON_SPEED_MASK; > dev->master_cfg |= DW_IC_CON_SPEED_FAST; > dev->hs_hcnt = 0; > -- > 2.30.2
