Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Aaro Koskinen <aaro.koskinen@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap1/board-osk.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 0a4c9b0b13b0c..e18b6f13300eb 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -332,11 +332,15 @@ static const struct property_entry mistral_at24_properties[] = {
{ }
};
+static const struct software_node mistral_at24_node = {
+ .properties = mistral_at24_properties,
+};
+
static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
{
/* NOTE: powered from LCD supply */
I2C_BOARD_INFO("24c04", 0x50),
- .properties = mistral_at24_properties,
+ .swnode = &mistral_at24_node,
},
/* TODO when driver support is ready:
* - optionally ov9640 camera sensor at 0x30
--
2.30.2
