Re: [PATCH v2 2/2] i2c: stm32f7: add SMBus-Alert support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All

On 3/18/21 2:44 PM, Alain Volmat wrote:
> Add support for the SMBus-Alert protocol to the STM32F7 that has
> dedicated control and status logic.
> 
> If SMBus-Alert is used, the SMBALERT# pin must be configured as alternate
> function for I2C Alert.
> 
> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> 
> ---
> v2: - rely on st,smbus-alert binding instead of smbus
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 73 ++++++++++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index c62c815b88eb..bd840cd2b9e4 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -51,6 +51,7 @@
>  
>  /* STM32F7 I2C control 1 */
>  #define STM32F7_I2C_CR1_PECEN			BIT(23)
> +#define STM32F7_I2C_CR1_ALERTEN			BIT(22)
>  #define STM32F7_I2C_CR1_SMBHEN			BIT(20)
>  #define STM32F7_I2C_CR1_WUPEN			BIT(18)
>  #define STM32F7_I2C_CR1_SBC			BIT(16)
> @@ -125,6 +126,7 @@
>  				(((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17)
>  #define STM32F7_I2C_ISR_DIR			BIT(16)
>  #define STM32F7_I2C_ISR_BUSY			BIT(15)
> +#define STM32F7_I2C_ISR_ALERT			BIT(13)
>  #define STM32F7_I2C_ISR_PECERR			BIT(11)
>  #define STM32F7_I2C_ISR_ARLO			BIT(9)
>  #define STM32F7_I2C_ISR_BERR			BIT(8)
> @@ -138,6 +140,7 @@
>  #define STM32F7_I2C_ISR_TXE			BIT(0)
>  
>  /* STM32F7 I2C Interrupt Clear */
> +#define STM32F7_I2C_ICR_ALERTCF			BIT(13)
>  #define STM32F7_I2C_ICR_PECCF			BIT(11)
>  #define STM32F7_I2C_ICR_ARLOCF			BIT(9)
>  #define STM32F7_I2C_ICR_BERRCF			BIT(8)
> @@ -283,6 +286,17 @@ struct stm32f7_i2c_msg {
>  	u8 smbus_buf[I2C_SMBUS_BLOCK_MAX + 3] __aligned(4);
>  };
>  
> +/**
> + * struct stm32f7_i2c_alert - SMBus alert specific data
> + * @setup: platform data for the smbus_alert i2c client
> + * @ara: I2C slave device used to respond to the SMBus Alert with Alert
> + * Response Address
> + */
> +struct stm32f7_i2c_alert {
> +	struct i2c_smbus_alert_setup setup;
> +	struct i2c_client *ara;
> +};
> +
>  /**
>   * struct stm32f7_i2c_dev - private data of the controller
>   * @adap: I2C adapter for this controller
> @@ -312,6 +326,7 @@ struct stm32f7_i2c_msg {
>   * @wakeup_src: boolean to know if the device is a wakeup source
>   * @smbus_mode: states that the controller is configured in SMBus mode
>   * @host_notify_client: SMBus host-notify client
> + * @alert: SMBus alert specific data
>   */
>  struct stm32f7_i2c_dev {
>  	struct i2c_adapter adap;
> @@ -340,6 +355,7 @@ struct stm32f7_i2c_dev {
>  	bool wakeup_src;
>  	bool smbus_mode;
>  	struct i2c_client *host_notify_client;
> +	struct stm32f7_i2c_alert *alert;
>  };
>  
>  /*
> @@ -1616,6 +1632,13 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
>  		f7_msg->result = -EINVAL;
>  	}
>  
> +	if (status & STM32F7_I2C_ISR_ALERT) {
> +		dev_dbg(dev, "<%s>: SMBus alert received\n", __func__);
> +		writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR);
> +		i2c_handle_smbus_alert(i2c_dev->alert->ara);
> +		return IRQ_HANDLED;
> +	}
> +
>  	if (!i2c_dev->slave_running) {
>  		u32 mask;
>  		/* Disable interrupts */
> @@ -1982,6 +2005,42 @@ static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
>  	}
>  }
>  
> +static int stm32f7_i2c_enable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
> +{
> +	struct stm32f7_i2c_alert *alert;
> +	struct i2c_adapter *adap = &i2c_dev->adap;
> +	struct device *dev = i2c_dev->dev;
> +	void __iomem *base = i2c_dev->base;
> +
> +	alert = devm_kzalloc(dev, sizeof(*alert), GFP_KERNEL);
> +	if (!alert)
> +		return -ENOMEM;
> +
> +	alert->ara = i2c_new_smbus_alert_device(adap, &alert->setup);
> +	if (IS_ERR(alert->ara))
> +		return PTR_ERR(alert->ara);
> +
> +	i2c_dev->alert = alert;
> +
> +	/* Enable SMBus Alert */
> +	stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_ALERTEN);
> +
> +	return 0;
> +}
> +
> +static void stm32f7_i2c_disable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
> +{
> +	struct stm32f7_i2c_alert *alert = i2c_dev->alert;
> +	void __iomem *base = i2c_dev->base;
> +
> +	if (alert) {
> +		/* Disable SMBus Alert */
> +		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
> +				     STM32F7_I2C_CR1_ALERTEN);
> +		i2c_unregister_device(alert->ara);
> +	}
> +}
> +
>  static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
>  {
>  	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
> @@ -2169,6 +2228,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	if (of_property_read_bool(pdev->dev.of_node, "st,smbus-alert")) {
> +		ret = stm32f7_i2c_enable_smbus_alert(i2c_dev);
> +		if (ret) {
> +			dev_err(i2c_dev->dev,
> +				"failed to enable SMBus alert protocol (%d)\n",
> +				ret);
> +			goto i2c_disable_smbus_host;
> +		}
> +	}
> +
>  	dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
>  
>  	pm_runtime_mark_last_busy(i2c_dev->dev);
> @@ -2176,6 +2245,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
>  
>  	return 0;
>  
> +i2c_disable_smbus_host:
> +	stm32f7_i2c_disable_smbus_host(i2c_dev);
> +
>  i2c_adapter_remove:
>  	i2c_del_adapter(adap);
>  
> @@ -2210,6 +2282,7 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
>  {
>  	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
>  
> +	stm32f7_i2c_disable_smbus_alert(i2c_dev);
>  	stm32f7_i2c_disable_smbus_host(i2c_dev);
>  
>  	i2c_del_adapter(&i2c_dev->adap);
> 

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>

Regards
-- 
--
~ Py MORDRET
--



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux