RE: [PATCH 05/11] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Clark Wang <xiaoning.wang@xxxxxxx>
> Sent: Wednesday, March 17, 2021 2:54 PM
> 
> add debug message when i2c peripheral clk rate is 0, then directly return
> -EINVAL.
> 
> Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
> Reviewed-by: Andy Duan <fugang.duan@xxxxxxx>

Drop old review when patch is changed

> ---
>  drivers/i2c/busses/i2c-imx-lpi2c.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c
> b/drivers/i2c/busses/i2c-imx-lpi2c.c
> index e718bb6b2387..8f9dd3dd2951 100644
> --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> @@ -209,7 +209,12 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct
> *lpi2c_imx)
> 
>  	lpi2c_imx_set_mode(lpi2c_imx);
> 
> -	clk_rate = clk_get_rate(lpi2c_imx->clk);

I guess the kernel can't compile right before this patch because lpi2c_imx->clk was
Removed In former patch
You need double check not break bisect

> +	clk_rate = clk_get_rate(lpi2c_imx->clk_per);
> +	if (!clk_rate) {
> +		dev_dbg(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");

s/dev_dbg/dev_err

> +		return -EINVAL;
> +	}
> +
>  	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
>  		filt = 0;
>  	else
> --
> 2.25.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux