[PATCH v10 6/7] media: i2c: imx319: Support probe while the device is off

[Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>]

From: Rajmohan Mani <rajmohan.mani@xxxxxxxxx>

Tell ACPI device PM code that the driver supports the device being powered
off when the driver's probe function is entered.

Signed-off-by: Rajmohan Mani <rajmohan.mani@xxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
Reviewed-by: Bingbu Cao <bingbu.cao@xxxxxxxxx>
---
 drivers/media/i2c/imx319.c | 72 +++++++++++++++++++++++---------------
 1 file changed, 44 insertions(+), 28 deletions(-)

diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index 8473c0bbb35d6..e0b22e9318fed 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -140,6 +140,8 @@ struct imx319 {
 
 	/* Streaming on/off */
 	bool streaming;
+	/* True if the device has been identified */
+	bool identified;
 };
 
 static const struct imx319_reg imx319_global_regs[] = {
@@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+/* Verify chip ID */
+static int imx319_identify_module(struct imx319 *imx319)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
+	int ret;
+	u32 val;
+
+	if (imx319->identified)
+		return 0;
+
+	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
+	if (ret)
+		return ret;
+
+	if (val != IMX319_CHIP_ID) {
+		dev_err(&client->dev, "chip id mismatch: %x!=%x",
+			IMX319_CHIP_ID, val);
+		return -EIO;
+	}
+
+	imx319->identified = true;
+
+	return 0;
+}
+
 /* Start streaming */
 static int imx319_start_streaming(struct imx319 *imx319)
 {
@@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319)
 	const struct imx319_reg_list *reg_list;
 	int ret;
 
+	ret = imx319_identify_module(imx319);
+	if (ret)
+		return ret;
+
 	/* Global Setting */
 	reg_list = &imx319_global_setting;
 	ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
@@ -2208,26 +2239,6 @@ static int __maybe_unused imx319_resume(struct device *dev)
 	return ret;
 }
 
-/* Verify chip ID */
-static int imx319_identify_module(struct imx319 *imx319)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
-	int ret;
-	u32 val;
-
-	ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
-	if (ret)
-		return ret;
-
-	if (val != IMX319_CHIP_ID) {
-		dev_err(&client->dev, "chip id mismatch: %x!=%x",
-			IMX319_CHIP_ID, val);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = {
 	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
 	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -2422,6 +2433,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
 static int imx319_probe(struct i2c_client *client)
 {
 	struct imx319 *imx319;
+	bool low_power;
 	int ret;
 	u32 i;
 
@@ -2434,11 +2446,14 @@ static int imx319_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
 
-	/* Check module identity */
-	ret = imx319_identify_module(imx319);
-	if (ret) {
-		dev_err(&client->dev, "failed to find sensor: %d", ret);
-		goto error_probe;
+	low_power = acpi_dev_state_low_power(&client->dev);
+	if (!low_power) {
+		/* Check module identity */
+		ret = imx319_identify_module(imx319);
+		if (ret) {
+			dev_err(&client->dev, "failed to find sensor: %d", ret);
+			goto error_probe;
+		}
 	}
 
 	imx319->hwcfg = imx319_get_hwcfg(&client->dev);
@@ -2491,10 +2506,10 @@ static int imx319_probe(struct i2c_client *client)
 		goto error_media_entity;
 
 	/*
-	 * Device is already turned on by i2c-core with ACPI domain PM.
-	 * Enable runtime PM and turn off the device.
+	 * Don't set the device's state to active if it's in a low power state.
 	 */
-	pm_runtime_set_active(&client->dev);
+	if (!low_power)
+		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -2547,6 +2562,7 @@ static struct i2c_driver imx319_i2c_driver = {
 	},
 	.probe_new = imx319_probe,
 	.remove = imx319_remove,
+	.flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
 };
 module_i2c_driver(imx319_i2c_driver);
 
-- 
2.20.1