Hello, This series add the GPI DMA in qcom geni spi and i2c drivers. For this we first need to move GENI_IF_DISABLE_RO and struct geni_wrapper to common headers and then add support for gpi dma in geni driver. Then we add spi and i2c geni driver changes to support this DMA. Lastly, add the GPI dma nodes and enable dma for spi found in Rb3 board. To merge this, we could merge all thru qcom tree with ack on spi/i2c. Vinod Koul (7): soc: qcom: geni: move GENI_IF_DISABLE_RO to common header soc: qcom: geni: move struct geni_wrapper to header soc: qcom: geni: Add support for gpi dma spi: spi-geni-qcom: Add support for GPI dma i2c: qcom-geni: Add support for GPI DMA arm64: dts: qcom: sdm845: Add gpi dma node arm64: dts: qcom: sdm845: enable dma for spi arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 57 +++ drivers/i2c/busses/i2c-qcom-geni.c | 246 ++++++++++++- drivers/soc/qcom/qcom-geni-se.c | 55 ++- drivers/spi/spi-geni-qcom.c | 395 ++++++++++++++++++++- include/linux/qcom-geni-se.h | 20 ++ 6 files changed, 747 insertions(+), 30 deletions(-) Thanks -- 2.26.2
