Hello!
This series performs refactoring of the Tegra I2C driver code and hardens
the atomic-transfer mode.
Changelog:
v7: - Reworked the "Clean up probe function" patch by moving out all
variable renamings into the "Clean up variable names" patch.
This results in a nicer diff, which was asked by Andy Shevchenko.
- Squashed "Improve coding style of tegra_i2c_wait_for_config_load()"
patch into "Factor out register polling into separate function" in
order avoid unnecessary ping-pong changes, which was asked by
Andy Shevchenko.
- Added more indentation improvements, it should be ideal now.
- I haven't changed order of the "Clean up variable types" patch,
which was suggested by Andy Shevchenko, because I already moved
that patch multiple times and we decided to sort patches starting
with more important cleanups and down to less important. The type
changes are more important than shuffling code around, IMO.
v6: - Added new patch that adds missing RPM puts, thanks to Andy Shevchenko
for the suggestion.
- Improved commit messages by extending them with more a more detailed
explanation of the changes.
- Added clarifying comment to the "Use reset_control_reset()" change,
which was asked by Andy Shevchenko.
- Refactored the "Clean up probe function" patch by moving the
dev_err_probe() change into the "Use clk-bulk helpers" patch,
which was suggested by Andy Shevchenko.
- Improved ordering of the patches like it was suggested by
Andy Shevchenko.
- Added Andy Shevchenko to suggested-by of the "Use clk-bulk helpers"
patch.
- Improved "Remove i2c_dev.clk_divisor_non_hs_mode member" patch by
making the case-switch to use "fast plus mode" timing if clock rate
is out-of-range. Just to make it more consistent.
- The "Improve tegra_i2c_dev structure" patch is squashed into
"Improve formatting of variables" and "Clean up types/names" patches.
- All variable-renaming changes are squashed into a single "Clean up
variable names" patch.
- Made extra minor improvement to various patches, like more comments
and indentations improved.
v5: - Dropped the "Factor out runtime PM and hardware initialization"
patch, like it was suggested by Michał Mirosław. Instead a less
invasive "Factor out hardware initialization into separate function"
patch added, it doesn't touch the RPM initialization.
- The "Remove outdated barrier()" patch now removes outdated comments.
- Updated commit description of the "Remove "dma" variable" patch,
saying that the transfer mode may be changed by a callee. This was
suggested by Michał Mirosław.
- Reworked the "Clean up and improve comments" patch. Couple more
comments are corrected and reworded now.
- Added r-b's from Michał Mirosław.
- New patches:
i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
i2c: tegra: Clean up variable types
i2c: tegra: Improve tegra_i2c_dev structure
v4: - Reordered patches in the fixes/features/cleanups order like it was
suggested by Andy Shevchenko.
- Now using clk-bulk API, which was suggested by Andy Shevchenko.
- Reworked "Make tegra_i2c_flush_fifos() usable in atomic transfer"
patch to use iopoll API, which was suggested by Andy Shevchenko.
- Separated "Clean up probe function" into several smaller patches.
- Squashed "Add missing newline before returns" patch into
"Clean up whitespaces, newlines and indentation".
- The "Drop '_timeout' from wait/poll function names" is renamed to
"Rename wait/poll functions".
- The "Use reset_control_reset()" is changed to not fail tegra_i2c_init(),
but only emit warning. This should be more friendly behaviour in oppose
to having a non-bootable machine if reset-control fails.
- New patches:
i2c: tegra: Remove error message used for devm_request_irq() failure
i2c: tegra: Use devm_platform_get_and_ioremap_resource()
i2c: tegra: Use platform_get_irq()
i2c: tegra: Use clk-bulk helpers
i2c: tegra: Remove bogus barrier()
i2c: tegra: Factor out register polling into separate function
i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg()
i2c: tegra: Clean up and improve comments
i2c: tegra: Rename couple "ret" variables to "err"
v3: - Optimized "Make tegra_i2c_flush_fifos() usable in atomic transfer"
patch by pre-checking FIFO state before starting to poll using
ktime API, which may be expensive under some circumstances.
- The "Clean up messages in the code" patch now makes all messages
to use proper capitalization of abbreviations. Thanks to Andy Shevchenko
and Michał Mirosław for the suggestion.
- The "Remove unnecessary whitespaces and newlines" patch is transformed
into "Clean up whitespaces and newlines", it now also adds missing
newlines and spaces.
- Reworked the "Clean up probe function" patch in accordance to
suggestion from Michał Mirosław by factoring out only parts of
the code that make error unwinding cleaner.
- Added r-b from Michał Mirosław.
- Added more patches:
i2c: tegra: Reorder location of functions in the code
i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
i2c: tegra: Remove "dma" variable
i2c: tegra: Initialization div-clk rate unconditionally
i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
v2: - Cleaned more messages in the "Clean up messages in the code" patch.
- The error code of reset_control_reset() is checked now.
- Added these new patches to clean up couple more things:
i2c: tegra: Check errors for both positive and negative values
i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load()
i2c: tegra: Remove unnecessary whitespaces and newlines
i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear()
i2c: tegra: Improve driver module description
Dmitry Osipenko (34):
i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
i2c: tegra: Add missing pm_runtime_put()
i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()
i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
i2c: tegra: Initialize div-clk rate unconditionally
i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
i2c: tegra: Runtime PM always available on Tegra
i2c: tegra: Remove error message used for devm_request_irq() failure
i2c: tegra: Use reset_control_reset()
i2c: tegra: Use devm_platform_get_and_ioremap_resource()
i2c: tegra: Use platform_get_irq()
i2c: tegra: Use clk-bulk helpers
i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()
i2c: tegra: Clean up probe function
i2c: tegra: Reorder location of functions in the code
i2c: tegra: Clean up variable types
i2c: tegra: Remove outdated barrier()
i2c: tegra: Remove likely/unlikely from the code
i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
i2c: tegra: Rename wait/poll functions
i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
i2c: tegra: Factor out register polling into separate function
i2c: tegra: Factor out hardware initialization into separate function
i2c: tegra: Check errors for both positive and negative values
i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg()
i2c: tegra: Improve formatting of variables
i2c: tegra: Clean up variable names
i2c: tegra: Clean up printk messages
i2c: tegra: Clean up and improve comments
i2c: tegra: Clean up whitespaces, newlines and indentation
i2c: tegra: Improve driver module description
drivers/i2c/busses/i2c-tegra.c | 1435 ++++++++++++++++----------------
1 file changed, 701 insertions(+), 734 deletions(-)
--
2.27.0
