Re: [PATCH v5 0/6] Support running driver's probe for a device powered off

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/10/20 10:27 PM, Sakari Ailus wrote:
> Hi all,
> 
...snip...
> 
> The use case is such that there is a privacy LED next to an integrated
> user-facing laptop camera, and this LED is there to signal the user that
> the camera is recording a video or capturing images. That LED also happens
> to be wired to one of the power supplies of the camera, so whenever you
> power on the camera, the LED will be lit, whether images are captured from
> the camera --- or not. There's no way to implement this differently
> without additional software control (allowing of which is itself a
> hardware design decision) on most CSI-2-connected camera sensors as they
> simply have no pin to signal the camera streaming state.
> 
> This is also what happens during driver probe: the camera will be powered
> on by the I²C subsystem calling dev_pm_domain_attach() and the device is
> already powered on when the driver's own probe function is called. To the
> user this visible during the boot process as a blink of the privacy LED,
> suggesting that the camera is recording without the user having used an
> application to do that. From the end user's point of view the behaviour is
> not expected and for someone unfamiliar with internal workings of a
> computer surely seems quite suspicious --- even if images are not being
> actually captured.
> 
> I've tested these on linux-next master. They also apply to Wolfram's
> i2c/for-next branch, there's a patch that affects the I²C core changes
> here (see below). The patches apart from that apply to Bartosz's
> at24/for-next as well as Mauro's linux-media master branch.

Sakari, we meet one issue - once the vcm sub-device registered, the user space
will try to open the VCM (I have not figure out who did that), it will also
trigger the acpi pm resume/suspend, as the VCM always shares same power rail
with camera sensor, so the privacy LED still has a blink.

> 
...snip...
-- 
Best regards,
Bingbu Cao



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux