Re: [PATCH v2 2/2] i2c: imx: Fix external abort on interrupt in exit paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 14, 2020 at 12:29:04PM +0200, Krzysztof Kozlowski wrote:
> If interrupt comes late, during probe error path or device remove (could
> be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
> i2c_imx_isr() will access registers with the clock being disabled.  This
> leads to external abort on non-linefetch on Toradex Colibri VF50 module
> (with Vybrid VF5xx):
> 
> Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
> Internal error: : 1008 [#1] ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
> Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
>   (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
>   (free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
>   (release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
>   (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
>   (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
>   (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
>   (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
>   (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
>   (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
>   (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
>   (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
>   (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
>   (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
> 
> Additionally, the i2c_imx_isr() could wake up the wait queue
> (imx_i2c_struct->queue) before its initialization happens.
> 
> The resource-managed framework should not be used for interrupt handling,
> because the resource will be released too late - after disabling clocks.
> The interrupt handler is not prepared for such case.
> 
> Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> 
> ---
> 
> Changes since v1:
> 1. Remove the devm- and use regular methods.

Hi everyone,

Similar patch for SPI driver was already merged [1]. Any comments here?

Best regards,
Krzysztof


[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=3d87b613d6a3c6f0980e877ab0895785a2dde581

> ---
>  drivers/i2c/busses/i2c-imx.c | 25 ++++++++++++++-----------
>  1 file changed, 14 insertions(+), 11 deletions(-)
> 



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux