pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a corresponding decrement is
needed on the error handling path to keep the counter balanced.
Fix this by adding the missed function call.
Signed-off-by: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-sprd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 19cda6742423..675f72a3fd60 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -285,8 +285,10 @@ static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
int im, ret;
ret = pm_runtime_get_sync(i2c_dev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_noidle(i2c_dev->dev);
return ret;
+ }
for (im = 0; im < num - 1; im++) {
ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im], 0);
@@ -571,8 +573,10 @@ static int sprd_i2c_remove(struct platform_device *pdev)
int ret;
ret = pm_runtime_get_sync(i2c_dev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_noidle(i2c_dev->dev);
return ret;
+ }
i2c_del_adapter(&i2c_dev->adap);
clk_disable_unprepare(i2c_dev->clk);
--
2.17.1
