Re: [PATCH V2 2/3] dt-bindings: i2c: Convert mxs i2c to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 04, 2020 at 09:49:17AM +0800, Anson Huang wrote:
> Convert the MXS I2C binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V1:
> 	- add "additionalProperties: false".
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mxs.txt  | 25 ----------
>  Documentation/devicetree/bindings/i2c/i2c-mxs.yaml | 55 ++++++++++++++++++++++
>  2 files changed, 55 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mxs.txt
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
> deleted file mode 100644
> index 4e1c8ac..0000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -* Freescale MXS Inter IC (I2C) Controller
> -
> -Required properties:
> -- compatible: Should be "fsl,<chip>-i2c"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain ERROR interrupt number
> -- clock-frequency: Desired I2C bus clock frequency in Hz.
> -                   Only 100000Hz and 400000Hz modes are supported.
> -- dmas: DMA specifier, consisting of a phandle to DMA controller node
> -  and I2C DMA channel ID.
> -  Refer to dma.txt and fsl-mxs-dma.txt for details.
> -- dma-names: Must be "rx-tx".
> -
> -Examples:
> -
> -i2c0: i2c@80058000 {
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	compatible = "fsl,imx28-i2c";
> -	reg = <0x80058000 2000>;
> -	interrupts = <111>;
> -	clock-frequency = <100000>;
> -	dmas = <&dma_apbx 6>;
> -	dma-names = "rx-tx";
> -};
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
> new file mode 100644
> index 0000000..3bc14bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale MXS Inter IC (I2C) Controller
> +
> +maintainers:
> +  - Shawn Guo <shawn.guo@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx23-i2c
> +      - fsl,imx28-i2c
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clock-frequency:
> +    $ref: /schemas/types.yaml#/definitions/uint32

'clock-frequency' already has a type.

> +    description: |
> +      Desired I2C bus clock frequency in Hz, only 100000Hz and 400000Hz
> +      modes are supported.

Sounds like constraints.

> +    default: 100000
> +
> +  dmas:
> +    maxItems: 1
> +
> +  dma-names:
> +    const: rx-tx
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - dmas
> +  - dma-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c@80058000 {
> +        compatible = "fsl,imx28-i2c";
> +        reg = <0x80058000 2000>;
> +        interrupts = <111>;
> +        clock-frequency = <100000>;
> +        dmas = <&dma_apbx 6>;
> +        dma-names = "rx-tx";
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux