Hi Dillon On 6/9/20 3:26 PM, dillon.minfei@xxxxxxxxx wrote:
From: dillon min <dillon.minfei@xxxxxxxxx> This patchset is intend to enable stmpe811 touch screen on stm32f429-disco board with three dts and one i2c driver changes. has been validated by ts_print tool Changes log: V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot V3: just add change log in [PATCH V3 3/4] below --- V2: remove id, blocks, irq-trigger from stmpe811 dts V1: ARM: dts: stm32: add I2C3 support on STM32F429 SoC ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 ARM: dts: stm32: enable stmpe811 on stm32429-disco board i2c: stm32f4: Fix stmpe811 get xyz data timeout issue dillon min (4): ARM: dts: stm32: add I2C3 support on STM32F429 SoC ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 ARM: dts: stm32: enable stmpe811 on stm32429-disco board i2c: stm32f4: Fix stmpe811 get xyz data timeout issue arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++ arch/arm/boot/dts/stm32f429-disco.dts | 47 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32f429.dtsi | 12 +++++++++ drivers/i2c/busses/i2c-stm32f4.c | 12 ++++++--- 4 files changed, 80 insertions(+), 3 deletions(-)
DT patches applied on stm32-next. I changed node ordering in patch 3. Thanks Alex
