Transferring multiple messages via XIIC suffers from strange interaction
between the interrupt status/enable register flags. These flags are being
reused in the hardware to indicate different things for read and write
transfer, and doing multiple transactions becomes horribly complex. Just
send a single transaction and reload the controller with another message
once the transaction is done in the interrupt handler thread.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Michal Simek <michal.simek@xxxxxxxxxx>
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-xiic.c | 43 ++++++++---------------------------
1 file changed, 10 insertions(+), 33 deletions(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index e4c3427b2f3f5..fad0b84a273d1 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -595,8 +595,6 @@ static void xiic_start_send(struct xiic_i2c *i2c)
{
struct i2c_msg *msg = i2c->tx_msg;
- xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
-
dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d",
__func__, msg, msg->len);
dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
@@ -614,11 +612,13 @@ static void xiic_start_send(struct xiic_i2c *i2c)
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
}
- xiic_fill_tx_fifo(i2c);
-
/* Clear any pending Tx empty, Tx Error and then enable them. */
xiic_irq_clr_en(i2c, XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_BNB_MASK);
+ XIIC_INTR_BNB_MASK |
+ ((i2c->nmsgs > 1 || xiic_tx_space(i2c)) ?
+ XIIC_INTR_TX_HALF_MASK : 0));
+
+ xiic_fill_tx_fifo(i2c);
}
static void __xiic_start_xfer(struct xiic_i2c *i2c)
@@ -634,35 +634,12 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
i2c->rx_pos = 0;
i2c->tx_pos = 0;
i2c->state = STATE_START;
- while ((fifo_space >= 2) && (first || (i2c->nmsgs > 1))) {
- if (!first) {
- i2c->nmsgs--;
- i2c->tx_msg++;
- i2c->tx_pos = 0;
- } else
- first = 0;
-
- if (i2c->tx_msg->flags & I2C_M_RD) {
- /* we dont date putting several reads in the FIFO */
- xiic_start_recv(i2c);
- return;
- } else {
- xiic_start_send(i2c);
- if (xiic_tx_space(i2c) != 0) {
- /* the message could not be completely sent */
- break;
- }
- }
-
- fifo_space = xiic_tx_fifo_space(i2c);
+ if (i2c->tx_msg->flags & I2C_M_RD) {
+ /* we dont date putting several reads in the FIFO */
+ xiic_start_recv(i2c);
+ } else {
+ xiic_start_send(i2c);
}
-
- /* there are more messages or the current one could not be completely
- * put into the FIFO, also enable the half empty interrupt
- */
- if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
- xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
-
}
static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num)
--
2.26.2
