[PATCH v2 06/12] i2c: designware: slave: Set DW I2C core module dependency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DW APB I2C slave code in fact depends on the DW I2C driver core, but not
on the platform code. Yes, the I2C slave interface is currently supported
by the platform version of the IP core, but it doesn't make it dependent
on it. So make sure the DW APB I2C slave config is only available if the
I2C_DESIGNWARE_CORE config is enabled.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Frank Rowand <frowand.list@xxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 14368c46cb63..368aa64e9266 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -541,8 +541,8 @@ config I2C_DESIGNWARE_PLATFORM
 
 config I2C_DESIGNWARE_SLAVE
 	bool "Synopsys DesignWare Slave"
+	depends on I2C_DESIGNWARE_CORE
 	select I2C_SLAVE
-	depends on I2C_DESIGNWARE_PLATFORM
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C slave adapter.
-- 
2.25.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux