[PATCH v13 1/2] dt-binding: i2c: add bus-supply property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In some platforms, they disable the power-supply of SCL/SDA due
to power consumption reduction. This patch add bus-supply property.

Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/i2c/i2c.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 9a53df4243c6..e6b5aafc5dc9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -98,6 +98,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	Names of map programmable addresses.
 	It can contain any map needing another address than default one.
 
+- bus-supply
+	phandle to the regulator that provides power to SCL/SDA.
+
 Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
-- 
2.18.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux